Intercooler Resource - Fitment, Pictures and Examples
Turbo Mini Forums

There have been a few questions recently about what intercoolers will fit in the front of a mini, so I thought I'd share some research I did when deciding what to run in my own car.

For the benefit of those who find this thread in the future I have collated the pictures into catagories to help people find what is possible with their set-up. I have included the username of the owner to allow users to search the forum for more information on a particular installation.

This is by no means an exhaustive list of all of the installations available on this forum, just the ones I have. If you have any pictures of your installation, that you feel may be of use to new/future users either post a link or the image in this thread and I can add them to the main post. Also feel free to add any information or post corrections for incorrect information.

I do not own the rights to any of the pictures below, they have all been aquired from this forum. If you would like any of the images removed for whatever reason just send me a PM and I will amend this post.

Edited by Mike-998 on 27th Jul, 2016.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Good work

Good work! Is that not nicks tho?

It is Nicks and it's a cosworth intercooler.

My current one is available off the shelf from Allard. It's just had one of the end tanks modified a bit.

Excellent resource though. Well done.

Edited by theoneeyedlizard on 26th Jul, 2016.

In the 13's at last!.. Just

I liked that settup :)
Finally got it running right at that

Yes i moved to the darkside

Instagram @jdm_brett

I don't see an intercooler on sprockets?

Drivers side inner wing, it is well hidden.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

mine was a mitsubishi 2.8 shogun i/c, for reference.

Thanks t@z, I'll update the post.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

This is a good idea! Well done mate

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

Yes, good effort !

Phil.

WWW.TURBO-MINI.COM

good stuff, the core on mine is actually an E46 one, as per below

http://www.ebay.co.uk/itm/BMW-320d-E46-INT...kYAAOSwXj5XGNHx

Nice and inspiring! Daim need to finish that turbo engine!!! Just need to dig out for an oilpump and timing chain..

you can do anything if you set your mind to it...
i rather blow it up winning than keep it together losing.

finish date set for project 1... march 2018

Well done mate, been looking for different ideas on intercoolers for a while, this is a great help!! Thanks

I said I'd do it, there's no need to remind me every 6 months!!

Good work, I'll send some better pics once I have it all fitted properly. I guess it's also worht adding that there are two intercoolers in Audi TT one on left hand side and one on right hand side. Difference is in outlet location/angle.

Edited by SadamPl on 27th Jul, 2016.

Made in Poland build thread:
http://www.turbominis.co.uk/forums/index.p...tid=570363&fr=0

1330 16V TURBO

water to air?

seen a car some time ago in the garage where i go ( and often go because.. well fiat... ) and that track car had nozzels in front of the intercooler to fog it with water to cool it down... useful?

Edited by Rammie2000 on 29th Jul, 2016.

you can do anything if you set your mind to it...
i rather blow it up winning than keep it together losing.

finish date set for project 1... march 2018

I've got Bennys old intercooler on mine, which is a copy of Nics

What diameter of pipes do you guys ise downstream of the compressor ?