Microsquirt ignition timing table
Turbo Mini Forums

Hi all
Well its finally come to that time, I have all the electrics fitted and now need to program the Microsquirt, which i'll be running as Ignition only for a start (will go injection later)

Is anyone willing to share an ignition table (Pleeeeeeeeeeeeeeeeeeeeeaase!!!!)

Specs:
1310cc, MED FIS head, 8.2:1 CR, Avonbar Phase2 cam, HIF44, Garrett T3 expecting high teens boost.
Microsquier, running IAT, CT & MAP, no TPS.

Edited by Turbonator on 23rd Oct, 2016.

"If its not broke, whack a turbo on it"

https://www.youtube.com/c/turbominitv

Every engine is going to be different.

For fuelling (the VE tables) TunerStudio will generate a good starting point but doesn't allow the same option for spark.

I've never tried this (I just used the default tables to start with) but this may be worth a go for you.

http://www.useasydocs.com/theory/spktable.htm

No guarantees as I've not tried it but it could be a good starting point.

Schrödinger's cat - so which one am I ???

No TPS? I don't know what you've done but don't simply leave the input floating. You need to ground it so that you don't have unexpected side effects.

Jean

http://www.jbperf.com/