| Page: |
| Home > Wanted > bare 1380 block or 1275 considered... or a set of 74mm pistons | |||||||
 243 Posts Member #: 1261 Senior Member Droitwich |
4th Jan, 2017 at 09:04:38am
Anybody got an offset bored 1380 block with a centre main cap going spare? Bores are too far gone on the one I got. Don't need any of the internal parts. Would consider a bare 1275 block.
|
||||||
|
4309 Posts Member #: 1321 Post Whore Wiltshire |
4th Jan, 2017 at 10:16:52am
Does anyone make 74mm pistons still. Would like a set for my block when the time comes. On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding |
||||||
 8215 Posts Member #: 90 Post Whore Somewhere around Swindon |
4th Jan, 2017 at 11:00:06am
I have several 1275 blocks so would part with one
Crystal Sound Audio said:
Why wolfie...you should have your name as Fuckfaceshithead ! "A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."-Douglas Adams |
||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
4th Jan, 2017 at 11:45:55am
Remember, it's illegal to bore a std 1275 block straight to 1380. On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
|
Site Admin  15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
4th Jan, 2017 at 12:36:54pm
On 4th Jan, 2017 Vegard said:
Remember, it's illegal to bore a std 1275 block straight to 1380. 
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
243 Posts Member #: 1261 Senior Member Droitwich |
4th Jan, 2017 at 12:58:54pm
cheers woflie, I'll hold out for a bit to see if I can find one with the work already done, otherwise i'll be back.
On 4th Jan, 2017 Tom Fenton said:
On 4th Jan, 2017 Vegard said:
Remember, it's illegal to bore a std 1275 block straight to 1380. You'll never take me alive 
|
||||||
 3673 Posts Member #: 9300 Post Whore Quarry Bonk |
4th Jan, 2017 at 05:36:12pm
Keith calver used to supply 74mm pistons im sure, i remember when i ordered my 73.5mm ones from him.
Edited by Carlzilla on 4th Jan, 2017. On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!! 17.213 @ 71mph, 64bhp n/a (Old Engine) |
||||||
 2406 Posts Member #: 341 aka T2clubby South Staffs |
6th Jan, 2017 at 06:48:05pm
I have a 1380 med road sport short block, Crank pistons rods cam etc. Maybe a bit more than you need though . |
||||||
| Home > Wanted > bare 1380 block or 1275 considered... or a set of 74mm pistons | |||||||
|
|||||||
| Page: |