Page: |
Home > Help Needed / General Tech Chat > GT1752 Hot side in / out diameters | |||||||
42 Posts Member #: 10317 Member Basildon, Essex |
26th Apr, 2017 at 02:55:46pm
As per title, does anyone know off hand (or can measure) the diameter for the hot side, both in and out on the GT1752?
|
||||||
4619 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
26th Apr, 2017 at 07:26:07pm
For the outlet, do you mean the hole where the downpipe clamps on ?
|
||||||
42 Posts Member #: 10317 Member Basildon, Essex |
26th Apr, 2017 at 08:52:40pm
Yep, and the inlet the hole where the manifold feeds to :) |
||||||
42 Posts Member #: 10317 Member Basildon, Essex |
27th Apr, 2017 at 01:43:51pm
Actually, scratch that. Downpipe side isn't important.
|
||||||
4619 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
27th Apr, 2017 at 01:58:37pm
I'll let you know this evening.
|
||||||
42 Posts Member #: 10317 Member Basildon, Essex |
27th Apr, 2017 at 02:10:37pm
Super duper!
|
||||||
4619 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
27th Apr, 2017 at 08:51:14pm
The hole in the turbine housing manifold face is 40mm.
|
||||||
42 Posts Member #: 10317 Member Basildon, Essex |
27th Apr, 2017 at 09:10:39pm
Smashing, cheers for that.
|
||||||
42 Posts Member #: 10317 Member Basildon, Essex |
27th Apr, 2017 at 09:10:43pm
double post Edited by Skortchio on 27th Apr, 2017. |
||||||
Home > Help Needed / General Tech Chat > GT1752 Hot side in / out diameters | |||||||
|
Page: |