Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > 998cc >

Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

15th May, 2017 at 07:25:18pm

the main thing is to get the compression ratio down, you can get the head taken out a bit, biut there is a limit ispecially if its been skimmed to get that 10:1 figure.

the other usual weak point are pistons, but from the spec i think it should have decent ones in there already



turbophil is up kendal way and does good head work. he may be able to get the chambers out to what is needed

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/


Home > 998cc >
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: