£250 seriously cheap
Turbo Mini Forums

Good evening lads this is gonna be a massive bargain

Right all my engines bits for the a series engine

998 metro block fitted with new can bearings and plus 40 bores slight surface rust from Storage.
Russell engineering 998 pistons plus 40 flat top with rings. One piston been out for the over bore.
Metro turbo alloy inlet been bead blasted and welded needs marching to finish off.
Fusion fabrication turbo manifold gt1549 Astra style flange.
2x gt1549 turbos off rover 200 and 400 tdi (don't match manifold. Matt at fusion said he can change it)
Turbo Dave alloy backplate
Minor a series timing cover and rocker cover painted purple
Custom a plus dip stick
Standard 998 metro cam
Retro sport alternator bracket silver
Retro sport prv cap silver
Retro sport heater tank off angled silver
Mra minis butt plus a plus
2x minispares gasket sets plus loads more seals and gaskets .
Standard 998 crank surface rust needs checking
Brand new cam followers
New thrust bearings
Water pump with gasket space and smithy bits bolts
Spring and ball prv
4 blade metal fan two half ones
Smithy bits tapped chest and fuel blank bolts
Smithy bits fuel blank
Standard controls
Temp sesnor
Halfords oil filter
Minispares transfer case bolts kit
Rocker posts
Hardened rocker shaft
Standard rocker arms
Manifold locaters
Then about 2 ish boxes of nuts bolts and washer
Other engine items as well
Minispares front grill


£250 No offers

I do have a mpi fuel tank as well I'll throw in

Thanks

Edited by Chalkie on 1st Aug, 2017.

Having issues uploading pictures currently

No chance of postage is there??

what dish on the pistons mate ?

Ouff so tempted

Yes i moved to the darkside

Instagram @jdm_brett

Ignore this

Edited by samforsey12345 on 4th Jul, 2017.

No chance of postage far to much stuff

Piston are flat tops

Jesus that is a bargain!

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

Yes yes it is insane to sell it all as owes me well over 1k

Jumped to the conclusion this was a 1275 motor
Still a bargain but not what we were after.
Excuse us.
Sam

Will do a more detailed thread list over weekend as my list is crap 😂

Heads up lightend pre verto backplate sold as did a clutch weekend and my mates one was fucked on the threads.

List be updated tonight. Thanks

List updated

Gonna leave this until 21st July then going on eBay may taken sensible offers.

Thanks

Bunp

The flange is to fit a mk3 astra 1.7td t15 turbo.

On 18th Nov, 2014 D4VE said:
went down to my local hydraulics place and he gave me a suitable replacement larger nipple

Going on eBay tomorrow nighy

Last offer to you chaps £400 No offers for everything Ive got left

so all above parts with MPI tank and a roof rack box of engine bits and even a set of mark 4 3 clock centre with 59K.

Look at this on eBay http://www.ebay.co.uk/itm/272776427235

Few hours left before it ends

Right £250 takes thus lot final offer need the space getting the block work was more than that.

Would you put it on a pallet for collection?

I'll take the lot if you can meet me at MITP.

On 18th Nov, 2014 D4VE said:
went down to my local hydraulics place and he gave me a suitable replacement larger nipple

Evening.

I'm not going put it on a pallet unfortunately. Why I put collection only.

With regards to mitp I'll try work something out but ideally I'd like to not take it in my car as I'm running the strip and wanna try keep it as light as possible

Thanks