Page:
Home > Help Needed / General Tech Chat > GT17 actuator location

Steve220

257 Posts
Member #: 11017
Senior Member

Shropshire

4th Mar, 2018 at 02:04:28pm

Hi all,

Working on locating the actuator on my MPi turbo build. I've had a few ideas and made a V1.0 bracket out of 0.9mm steel (the actual will be at least 3mm). Wanted to see if I could get some constructive feedback to see if i can perfect this.










monsterob

264 Posts
Member #: 11029
Senior Member

Crewe

4th Mar, 2018 at 06:09:32pm

looks good. planning on putting mine the other side in a straight up and down but this will require moving the arm on the actual turbo waste gate from around the 12 oclock to 3 o clock position

Outside the box


Will

167 Posts
Member #: 11091
Advanced Member

4th Mar, 2018 at 08:40:56pm

Looks smart, will you have plenty of bulkhead clearance

On 4th Mar, 2018 monsterob said:
looks good. planning on putting mine the other side in a straight up and down but this will require moving the arm on the actual turbo waste gate from around the 12 oclock to 3 o clock position


That’s what I’ve done, plenty more clearance that way for my build
Home > Help Needed / General Tech Chat > GT17 actuator location
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: