Small bore head gasket.
Turbo Mini Forums

What's the general consensus on the best head gasket currently available for a boosted small bore ?

Phil.

WWW.TURBO-MINI.COM

Not a single person running a 998 turbo ?

Phil.

WWW.TURBO-MINI.COM

I used the Payen copper one on the first one, no problems:

https://www.minispares.com/product/Classic/...ack%20to%20shop

I think that I fitted one of these to the latest, but only ran in the garage so far:

https://www.minispares.com/product/classic/C-AEA647.aspx

Edited by Paul S on 15th Aug, 2018.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."

ive just fitted a payen copper one I think.

the other one hasn't been available for years now..

unfortunately I couldn't tell you whether either one are any good as other things have always broken first .

I think the copper is the best standard option.

I would say the 940 head 11 studs, and cometic was well worth it when I ran the 1060

Edited by gr4h4m on 15th Aug, 2018.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Cheers fellas.

Phil.

WWW.TURBO-MINI.COM