Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Help Needed / General Tech Chat > Turbo Sizing Advice

Carlzilla

User Avatar

3673 Posts
Member #: 9300
Post Whore

Quarry Bonk

18th Dec, 2018 at 10:25:26am

Hi all, hope you guys are well. Not frequented for a while as nothing has really happened on either of the minis. (Tried 14psi on the 998 last time it was used and still didn't break it 😂*wink*
Looking at Turbocharging the B18C in my Integra.
Don't want to just whack any old turbo on like most end up doing, and struggling to get my head around compressor maps. The engine capacity is 1797cc and currently produces around 195-197hp n/a.
The absolute Maximum the turbo will have to produce is around 400hp (leaving scope so it's not working too hard) at somewhere around 10-11 psi @9000rpm.Boost building from around 3500rpm upwards That's as far as I've roughly got with looking into it. But cannot seem to find something suitable looking at the maps.
Cheers!

On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper

On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!!

17.213 @ 71mph, 64bhp n/a (Old Engine)

jonny f

User Avatar

2091 Posts
Member #: 9894
Post Whore

Dorking

18th Dec, 2018 at 12:16:41pm

Ban. Minis only please. *wink*

Carlzilla

User Avatar

3673 Posts
Member #: 9300
Post Whore

Quarry Bonk

18th Dec, 2018 at 02:18:03pm

Shhhh 🤫

On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper

On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!!

17.213 @ 71mph, 64bhp n/a (Old Engine)

Tom Fenton
Site Admin

User Avatar

15300 Posts
Member #: 337
Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner

&

TM legend.

Rotherham South Yorkshire

18th Dec, 2018 at 06:31:48pm




On 18th Dec, 2018 jonny f said:
Ban. Minis only please. *wink*


Sounds good to me 😆


On 29th Nov, 2016 madmk1 said:

On 28th Nov, 2016 Rob Gavin said:
 I refuse to pay for anything else


Like fuel 😂😂

minimole23

4300 Posts
Member #: 1321
Post Whore

Wiltshire

18th Dec, 2018 at 09:01:09pm

That should go well!

On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding

jonny f

User Avatar

2091 Posts
Member #: 9894
Post Whore

Dorking

19th Dec, 2018 at 12:20:44am

Lol come on Carl we need mini updates

Carlzilla

User Avatar

3673 Posts
Member #: 9300
Post Whore

Quarry Bonk

19th Dec, 2018 at 07:06:31pm

I think mine might be going and any of the tasty bits that can transfer to the 998t will do, such as the kad radius arms and rear hubs, the Ti bolt collection, sccr box and minispares diff, newer megajolt and Tom's trigger wheel and bracket combo, new wiring harness, poly windows maybe, etc etc

Edited by Carlzilla on 19th Dec, 2018.

On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper

On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!!

17.213 @ 71mph, 64bhp n/a (Old Engine)
Home > Help Needed / General Tech Chat > Turbo Sizing Advice
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: