Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > A-Series EFI / Injection > VEMs wiring and sensors for K1100 build

Shiner

33 Posts
Member #: 6004
Member

Portsmouth

6th Apr, 2019 at 01:01:18pm

Hi all,

I need some help on making the wiring loom for the Vems unit to each sensor on my K1100 build.

I was relying on a topic on the efiminis forum that had all the information required but has since gone.

Just hoping someone on here can help me with pin outs for the vems connector and the pin outs for the sensors/injectors.

I have the vems wideband sensor, SC trigger wheel sensor, BMW throttle bodies with their injectors and TPS sensor.

I don't have a MAP sensor and guess its required, which one goes with this setup?

Thanks and any help would be appreciated.

Martin

Turbo Phil

User Avatar

4619 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

6th Apr, 2019 at 02:07:59pm

Colin (Sprocket) is your man for Vems.

Phil.

WWW.TURBO-MINI.COM


Shiner

33 Posts
Member #: 6004
Member

Portsmouth

7th Apr, 2019 at 01:22:19am

Thanks Phil,

Have sent Colin a message.
Home > A-Series EFI / Injection > VEMs wiring and sensors for K1100 build
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: