Page: |
Home > Help Needed / General Tech Chat > Still smoking | |||||||
286 Posts Member #: 4008 Senior Member near cardiff np12 |
10th Apr, 2019 at 08:42:40pm
After loads of issues with my engine I’ve now rebuilt it, rings, hone, cam bearing, mains etc and .......... it’s still smoking 🤬
|
||||||
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
10th Apr, 2019 at 11:13:52pm
Plug colours? On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
4619 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
10th Apr, 2019 at 11:39:35pm
What’s the oil return like ? Free flowing and of a decent size ?
|
||||||
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
11th Apr, 2019 at 09:33:36am
good thought from Phil,
On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
11th Apr, 2019 at 10:37:49am
White smoke sounds like it's from the turbo. Oil return is worth a check. Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
2618 Posts Member #: 1246 Post Whore Lowestoft, Suffolk. |
11th Apr, 2019 at 01:19:44pm
High oil pressure causing passing of the turbo oil seals?
|
||||||
286 Posts Member #: 4008 Senior Member near cardiff np12 |
11th Apr, 2019 at 07:31:48pm
Thanks for the replies.
|
||||||
2618 Posts Member #: 1246 Post Whore Lowestoft, Suffolk. |
11th Apr, 2019 at 11:00:51pm
Section about oil feeds may be noteworthy.
Edited by shane on 11th Apr, 2019. |
||||||
10020 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
12th Apr, 2019 at 08:58:42am
Just because the turbo has been rebuild doesn't mean that it's right. It might be worth taking it off and seeing if it still smokes. If so you have your answer.
On 11th Apr, 2019 flyingturd said:
Thanks for the replies. oil return is going into the old fuel pump with a new pipe and its new. turbo has been rebuilt plugs are a little black but havent properly run it If something is worth doing, it's worth doing half of. |
||||||
2618 Posts Member #: 1246 Post Whore Lowestoft, Suffolk. |
12th Apr, 2019 at 09:03:12am
On 12th Apr, 2019 John said:
Just because the turbo has been rebuild doesn't mean that it's right. It might be worth taking it off and seeing if it still smokes. If so you have your answer. On 11th Apr, 2019 flyingturd said: Thanks for the replies. oil return is going into the old fuel pump with a new pipe and its new. turbo has been rebuilt plugs are a little black but havent properly run it Shane |
||||||
Site Admin 15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
12th Apr, 2019 at 11:26:09am
If its brand new rings, hone etc, do you just need to drive it under load to make the rings bed in?
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
4619 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
12th Apr, 2019 at 12:20:28pm
As Tom said, if it’s a new build you’ll need to bed the rings in. Pull the boost hose off the compressor housing and see if there’s any oil in there to.
|
||||||
2909 Posts Member #: 83 Post Whore Glasgow, Scotland |
14th Apr, 2019 at 03:25:48pm
gotta disagree (respectfully) with new rings and a hone, if its ok it will be smoke free from the get go.
turbo 16v k-series 11.9@118.9 :)
|
||||||
6743 Posts Member #: 828 Post Whore uranus |
14th Apr, 2019 at 08:35:59pm
lots of breathers ? Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM |
||||||
Home > Help Needed / General Tech Chat > Still smoking | |||||||
|
Page: |