Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Help Needed / General Tech Chat > Dimensional differences between HS6 and gif of a metro

Supercharged-dunger

15 Posts
Member #: 11269
Member

Hi guys I am building an inlet manifold for a metro SU and plenum.
I have a plenum for measuring but I only have a HS 6

From pictures it looks like the metro carb is a deep on the bottom side as it is to the bottom of the jet on a hs?.

Iím only asking because thereís not a great deal of room. Iíd rather put a box in the firewall and move it all back than have the bottom of the carb Hitting tbe gigantic fucking gt17 flange..


Thanks for any input 👍


Supercharged-dunger

15 Posts
Member #: 11269
Member

You see in. This photo. I want the manifold flange basically level with the turbo flange. Otherwise I will have to extend it past it and it will probably crash into the firewall. If someone could just measure how far the hif extends down past the bottom of the flange it would be tops


Attachments:

Home > Help Needed / General Tech Chat > Dimensional differences between HS6 and gif of a metro
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: