Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > For Sale > Selling up all turbo parts

custodia

16 Posts
Member #: 9675
Member

coventry

Hi all

After many years of deliberation, I have decided to sell up all my turbo parts and revert back to NA and to just drive my mini and enjoy it whilst I still can.

Unfortunately, I have no idea what it is all worth and so have done research via eBay so I apologize in advance if the prices are a bit off. Needless to say, realistic offers will be considered. Would rather sell on here than on ebay.

All items are collection from Coventry. No cheques written in Crayola, swapsies or trades just good old cash please.


1) 12g940 turbo head with double valve springs, was going to refurb and go with bigger valves - £100
https://photos.app.goo.gl/eQ5T89e3KLanZWN17
https://photos.app.goo.gl/hnqUa5B6o9V8QFHN8
https://photos.app.goo.gl/TijMV7z2sfbWzajs8

2) Selection of t2 and t25 turbos. Would advise rebuilds as some play in shafts - £90
https://photos.app.goo.gl/yzSjSUVj4uSThakX6
https://photos.app.goo.gl/DojiAwjPJcRGEoVL6

3) Set of brand-new bronze valve guides never used - £15
https://photos.app.goo.gl/3PeCW3pPnmxbYkvn9

4) Valve spring top and bottom retainer caps made from titanium, very light. Hole through top caps approximately 8.95mm at bottom. Believed to be copies of standard items - £120
https://photos.app.goo.gl/vtizExdPvLMHYati7

5) Selection of dump / BOV. One used one new - £50
https://photos.app.goo.gl/1XvfGgQvaBjnTCzv8
https://photos.app.goo.gl/SWiYH8nWubr643cz9

6) Brise A+ high torque start motor. Some damage to face from debris in the casing - £100
https://photos.app.goo.gl/pmAhW544M2xHsXAD9
https://photos.app.goo.gl/yFGzfoVEqLuqHtpA8

7) HKS mushroom air intake and pipework - £100
https://photos.app.goo.gl/rUXMjxtF747C94si9
https://photos.app.goo.gl/X6cMRCFpEir9KRgf9

8) Turbo Jacket - £20
https://photos.app.goo.gl/trry6W5LcrXQbDsU7
https://photos.app.goo.gl/3VKkDwyCY5JwnBmR6

9) Turbo carb, inlet, plenum, spacer with takeoff and heat shield. Can’t find the bolts that attach the plenum to the carb. - £400
https://photos.app.goo.gl/ojS7wsf1BDMfAuwG8
https://photos.app.goo.gl/smzk6cDyYhRHjs9J6

10) Intercooler and pipework from mark gtt’s clubman. Custom built and good for over 300bhp. - £150
https://photos.app.goo.gl/xCXfS9NHyyZyMWak9
https://photos.app.goo.gl/DTmJSagZxxhozF8D9

11) Remote mount oil filter housing, pipework and mini takeoff plate and a selection of other fittings. Was going to chuck the cooler and buy a smaller one. - £75
https://photos.app.goo.gl/nKxLiNvFDNDe68RR8
https://photos.app.goo.gl/RYG8iX7kMs1KPWZs6

12) Mirage manifold setup with turbo - £400
https://photos.app.goo.gl/PvUHzAMFpF64r83e6
https://photos.app.goo.gl/psL3DpjqFiB3Kq4TA

13) Spare gearbox dam 5626 with diff - £60
https://photos.app.goo.gl/7XHxEFa7zZ4Qm8if7
https://photos.app.goo.gl/UmAbPazCwSi5nehh7
https://photos.app.goo.gl/ExmpNcYaC8rWTaFq9

14) Spare gearbox dam 5626 no diff - £40
https://photos.app.goo.gl/WW3jCwkT8uPKPMhG9
https://photos.app.goo.gl/kjwqYTygm6t4eWja8
https://photos.app.goo.gl/jhxyeMYdVhg2MgzZ8

15) Sealey yk10b 10 tonne bearing press. Can’t find the bolts that hold the beam higher. - £150
https://photos.app.goo.gl/hMQpmCxvZD3mJ2c5A




Edited by custodia on 30th Jul, 2020.


Amp

432 Posts
Member #: 7856
Senior Member

Essex

None of the photos seem to be working for me for some reason! Pm'd regarding starter

Edited by Amp on 29th Jul, 2020.


wilsonc001

45 Posts
Member #: 11333
Member

Yep, photos not working for me either - might be interested in a couple of bits but I can't see!


Ralf

User Avatar

52 Posts
Member #: 11964
Advanced Member

Lindlar

nice offers.
Regarding the Mirage manifold/turbo setup, is it comparable to the FusionFabs manifold?
What about the turbo condition, does it need to reworke?


custodia

16 Posts
Member #: 9675
Member

coventry

The pictures should be working now.
Had a look at the fusion fabs manifold and they appear to be much the same except the fusion manifold is designed for and has the bolt pattern of the newer more modern gt1752 turbos whereas the miarge manifold is designed to accept the older t2 / t25 design of turbo.

The turbo spins freely and doesn't have any play in or out and around 1mm of side to side play.

On 31st Jul, 2020 Ralf said:
nice offers.
Regarding the Mirage manifold/turbo setup, is it comparable to the FusionFabs manifold?
What about the turbo condition, does it need to reworke?

Edited by custodia on 3rd Aug, 2020.


Ralf

User Avatar

52 Posts
Member #: 11964
Advanced Member

Lindlar

you have pm *wink*


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

Pmed you about the turbo jacket

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


jason050377

29 Posts
Member #: 12072
Member

interested in cooler if you would post to AUS cheers


Beno1990

1 Posts
Member #: 12080
Junior Member

PM’d you. Item 10,11,12

Home > For Sale > Selling up all turbo parts
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: