Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Help Needed / General Tech Chat > Diff side cover bush running clearance

shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

3rd Sep, 2020 at 07:40:18pm

Evening all,

I'm replacing the bronze bushes in the differential side covers, just wanted to double check the running clearance before I machine them.

http://minispares.com/product/Classic/Gear...k%20to%20search

Minispares say to ream to 31.78mm / 1251.18", my Pot joints measure 1250.05" , is 001.13" suitable for running clearance?
Im concerned this is a little too snug.
Ive had a search and not found anything conclusive.

Thanks in advance

Shane

Tom Fenton
Site Admin

User Avatar

15300 Posts
Member #: 337
Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner

&

TM legend.

Rotherham South Yorkshire

3rd Sep, 2020 at 09:19:40pm

It works out to almost exactly 1 thou per inch diameter. That’s perfect IMO.


On 29th Nov, 2016 madmk1 said:

On 28th Nov, 2016 Rob Gavin said:
 I refuse to pay for anything else


Like fuel 😂😂

shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

3rd Sep, 2020 at 09:41:19pm

Thanks Tom, I have little experience with these so just wanted some reassurance.

Shane
Home > Help Needed / General Tech Chat > Diff side cover bush running clearance
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: