Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Technical Chat > Turbo exhaust valve guides

NDT

23 Posts
Member #: 11884
Member

Does anyone still stock these?
If not, can anyone see a problem with me just drilling some standard ones and reaming after fitting?


Turbo Phil

User Avatar

4584 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

Thereís no issue drilling then reaming them to size.

Phil.

WWW.TURBO-MINI.COM


viz139

102 Posts
Member #: 9182
Advanced Member

Still listed here
http://www.retrominisltd.co.uk/index.php?m...products_id=319


Turbo Phil

User Avatar

4584 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

Standard size ones are £1.68 a piece from Minispares, & if you have access to a lathe itís easy enough to open them out.

Phil.

WWW.TURBO-MINI.COM


NDT

23 Posts
Member #: 11884
Member

Happily I have a lathe!

Home > Technical Chat > Turbo exhaust valve guides
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: