Donations towards server fund so far this month.

£0.00 / £100.00 per month
Home > Technical Chat >

alan douglas

7 Posts
Member #: 12326
Junior Member

when I built mine I used a flat alloy plate with the 4 holes in for the trumpets to hold the plenum chamber onto the throttle bodies then I welded the sides on with the blown air on one side and the blow off valve on the other side then bolted the back plate onto the box with a gasket

Home > Technical Chat >
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password: