Turbo Mini Forums

The copper is 10mm ID 8.9mm, the rubber pipe ID is 8m for both send and return. I have the 10mm ID rubber here already but I stupidly bought my 12mm ID 11m copper from China... 3 week wait. I'll get that sorted as soon as it turns up.

Dash pot oil I've not even considered.... I took the dash pot off (dome thing 3 screws with a screw top and bracing ring) a few weeks ago to check for debris. no oil escaped. I didn't see an...carbs are black magic to me !

@Steve I'm running an Avonbar (before minimine) electronic turbo dizzy .... is the advice to gap to .7mm ?

thanks all. I'm able to get things i would never of dreamt i needed to checked out !

Edited by citykie on 8th Apr, 2024.