O/T Thieving Scrotes
Turbo Mini Forums

At work ATM, as some of you know, I work at a large steelworks.

Had a call from the production shift manager, some scrotes had come onto plant, and attempted to break into our alloy stores. As a producer of high alloy engineering and forging steels, we commonly use alloy additions, up to values around 20k/tonne, so that is what these fcukers were after.

After being rumbled, they had legged it onto our scrapyard, imagine one of the most desolate horrible unforgiving places you can, and you're not far off.

Police attended, and after some searching, found 2 of them hiding. I did my best to help by driving round in the works van looking for any movement. I had a pair of 24" stilsons with me just in case.

Returned to where the captured cnuts were, and they are giving the coppers verbal as they are cold, and want to know when a van is coming to take them to the police station!!!!!!!!!!!!!!!!! I couldn't believe their cheek! All I can say is that its a good job none of our production lads caught them.....

Luckily this time they didn't get away with owt, its not the first time the stores have been raided though, only recently they ram raided it......

Little gits eh!

We had some 'fittings' go missing from Eaton Manchester a few years ago. Fittings is actually a mild description for the super-expensive alloyed frames that gears and shafts are suspended on when they go into the furnaces at super-high temperatures...
Interestingly, these were put 'outside' a week earlier as there was work going on where they were normally stored - and to anyone of us (me included) just looked like cast iron framework - worth naff all.
Someone knew better! Over 200K's worth of kit was spirited away in just a few minutes whilst one securty guard was on his rounds, and the other was taking a leak!

Insider job?
Never caught anyone though!

SImilar thing happened to us although it was an inside job.

We also use a lot of the so called super alloys, nimonics etc.

Somebody had been taking a block out in their lunch box every day!! Due to the fact the stuff is quite rare and comes with a material code on when they took it to the metal merchants they got a bit suss.
Basically they rang the supplier which they figured out from the numbers, who then rang us!
Suprisingly they got sacked!! Ha ha!
Quite a clever plan though i must admit but fately flawed!

simular thing happened at my place, 2 guys in a lorry said they were delivering some goods to my place and left with about 400k worth of copper cable and gold plated components.

when they eventually got caught they said they were gunna melt the copper and gold and sell them in blocks

hahaha, nobs.......

the problem with most scrap metel theives is that they are thick bastards and oftern have no idea what they are lifting , so either get cought by the scrap merchants or get f--k all for it .
but on a brighter note ,without these thic twats we'd have no class structure,lol.

carl

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

If at first you don't suceed.... hit it again!!

hell, that makes me so mad:(

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com

We had a simmilar thing when I worked at British Steel. Some pikey tried to cut through a large cable to take it home. Unfortunately for him it was live (I seem to remember 6.6Kv) Anyway when they found the fault in the cable they also found a chared hacksaw. A bloke was found in hospital with matching injuries, nothing was ever proved though. I guess having survived a 6.6Kv jolt giving him the chair would have been no good.

http://www.twin-turbo.co.uk
http://www.hillclimbandsprint.co.uk/default.asp

A man without a project is like a like a woman without a shopping list.

round my way they would try to pinch the saddle of a nightmare!

Some c**t stole my phone at work last week, fookers.

Its only a bit of metal. If it blows it blows!

http://www.putfile.com/mini300bhp

tom-you want to make sure those slag dvd's are locked away safe too

i work at rolls, and believe me, everythibg goes missing. last year on the production line, some one managed to walk out with 20 or so plasma pc screens, and earlier in the year, we had a lorry from spain turn up, packed full of imagrants! bloody craizy here!!!

the paint master! D