Page:
Home > Introduce Yourself > my intro

robert

User Avatar

6752 Posts
Member #: 828
Post Whore

uranus

2nd Jan, 2006 at 07:40:19pm

hello everybody, i have a 1310 turbo mini own cam head ported by me non intercooled had 114 bhp on dyno with 3.5 to 4 psi boost at 6000rpm . now fitted with omega pistons and a lower cr so more boost this summmer !!.

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

Tom Fenton
Site Admin

User Avatar

15300 Posts
Member #: 337
Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner

&

TM legend.

Rotherham South Yorkshire

2nd Jan, 2006 at 07:56:08pm

Welcome to the forum!

That is an impressive power output for such a low boost level!

Have a read through some of the old posts, there is a wealth of useful info on this site.


On 29th Nov, 2016 madmk1 said:

On 28th Nov, 2016 Rob Gavin said:
 I refuse to pay for anything else


Like fuel 😂😂

robert

User Avatar

6752 Posts
Member #: 828
Post Whore

uranus

2nd Jan, 2006 at 08:04:01pm

thanks tom ,yes i was a bit suprised myself , i think the 9.2 to 1 cr helped a lot . regards robert

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

AlexB
Site Admin

User Avatar

6293 Posts
Member #: 1
The boring bloke who runs this place.

Berkshire

2nd Jan, 2006 at 08:38:20pm

Welcome :)


jonnyd64

86 Posts
Member #: 631
Advanced Member

Thames valley

3rd Jan, 2006 at 05:20:30pm

Afternoon , glad you found it.Thanks for the txt i found it to, again.I won`t welcome you cause im as new as you.We need some photos of the cars on here ,dont you think?*tongue*
SPK later:cool:

I know , i know im sorry , it just makes me grin !!!

Intercooled 1293 cc Turbo +
March 06,4psi and counting .
Its now gone up to 8psi.
Nov 06,10psi +.
And now part of the Airbourne club.


T3Tone

User Avatar

1666 Posts
Member #: 252
Post Whore

Sunny suffolk

4th Jan, 2006 at 08:30:59pm

Hello and welcome to the forum, and yes very impressive power figure:)

-MINI CLUBMAN 1380 TURBO-

robert

User Avatar

6752 Posts
Member #: 828
Post Whore

uranus

4th Jan, 2006 at 08:54:06pm

thank you very much tone ,i wasnt expecting as much from a stock actuator on the turbo .but i was using a self ported 1.4 inlet valve head high ratio rockers my own spec cam ,and it seemd to all work together quite well.regards robert.

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM
Home > Introduce Yourself > my intro
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: