Page:
Home > Help Needed / General Tech Chat > kent 276md timing figures

Dangerous

User Avatar

2521 Posts
Member #: 417
Post Whore

Swindon

15th Apr, 2006 at 07:57:48pm

Can find every cam but ! can't find kent website,Cams in waiting timing.

Put it in as it was lying around doing nothing,got to be better than the std.


Metro turbo weekend driver,Mini turbo in the making again!



icklemini

100 Posts
Member #: 745
Advanced Member

Northampton

15th Apr, 2006 at 08:08:14pm

AC Dodd has a list of the figures here:
http://p211.ezboard.com/fminiclassicfrm12....opicID=51.topic

TTFN,
Dave


Dangerous

User Avatar

2521 Posts
Member #: 417
Post Whore

Swindon

15th Apr, 2006 at 08:45:13pm

Cheers

Here is the Kent 276;

Checking height: 0.016" @ lobe

Timing: (Intake): 29/61 (Exhaust): 66/34

Nominal lobe lift: (Intake): 0.293" (Exhaust): 0.315"

Duration (Intake): 270 (Exhaust): 280

Lobe centre angle (Intake): 106 (Exhaust): 106

Lobe separation angle: 106

Lift on overlap: 0.078"



I make that 104 degrees inlet fully open

edit correction I make it 106*blush*

Edited by Dangerous on 15th Apr, 2006.


Metro turbo weekend driver,Mini turbo in the making again!



Sprocket

User Avatar

11046 Posts
Member #: 965
Post Whore

Preston On The Brook

15th Apr, 2006 at 09:17:23pm

http://www.kentcams.com/

There you go *wink*

On 26th Oct, 2004 TurboDave16v said:
 Is it A-Series only? I think it should be...
So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'...


On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........
Home > Help Needed / General Tech Chat > kent 276md timing figures
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: