Page:
Home > Help Needed / General Tech Chat > bleed valve

nobbie

141 Posts
Member #: 162
Advanced Member

31st Mar, 2004 at 04:34:34pm

hi there im going to be fitting a bleed valve to my mini turbo i have looked at the how to pages and they are good, im dont understand one part of the instalation though.



Remove the ecu and either block the pipe or remove the t-piece that goes between the regulator and plenum and replace with a single bit of hose or a joiner.

i will not be running the ecu so no probs there, i dont have the regulator yet but i will need one, all i have from the turbo is a pipe going from the turbo to the actuator and onother pipe that is just loose i assume that this is ware the conection to the ecu would go. is this the pipe i conect the bleed valve to.

can anyone help me please

Carl

User Avatar

2924 Posts
Member #: 95
Post Whore

liverpool-on-sea

31st Mar, 2004 at 09:34:53pm

how ive done mine is blocked the lose pipe off and fitted the bleed valve in the middle of the pipe from turbo to actuator. *smiley*

no longer a series, but still 1.3 turbo.

On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl.
Home > Help Needed / General Tech Chat > bleed valve
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: