Page:
Home > Help Needed / General Tech Chat > boost guage

nobbie

141 Posts
Member #: 162
Advanced Member

31st Mar, 2004 at 04:37:46pm

i also would like to know where to conect the boost guage to please.

does it conect in between the pipe going from the end of the dump valve to the inlet manifold.


Turbo Phil

User Avatar

4642 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

31st Mar, 2004 at 07:02:13pm

You could connect it into the dump valve pipe which goes to the manifold, i used to have mine like this and it seemed to be fine. Or you could tap a new connection into the manifold and connect it to that.

Phil. *smiley*

WWW.TURBO-MINI.COM


AlexF2003

5795 Posts
Member #: 80
AFRacing LTD

Newbury, Berks

31st Mar, 2004 at 08:09:29pm

new connection is the best way :)

alex

AlexF

fab

User Avatar

1497 Posts
Member #: 100
Parisien Turbo Expert

Paris\' suburb

31st Mar, 2004 at 08:17:00pm

depend which boost you want to now, the one at the comp side to plot a map, the one at the engine side to know he engine boost/vs cr.. or just to have a boost gauge....
I 'm using boost gause only to set the boost pressure and then don't use it any more; so I'm reading the pressure at the comp side on the fuell line, on the plenum and at the manifold,when all the numbers are known and ok i'm not using it any more.
fab

Home > Help Needed / General Tech Chat > boost guage
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: