Cheap / available LSD crownwheel bolt info.
Turbo Mini Forums

(copied from another forum that I can't link to - hence the blatant plagiarising)!!!!

It's a usa forum, but these things must be available in the UK - or via USA>UK mail order....

Just thought it'd be usefull



XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
For crown wheel to LSD fastening I use ARP Chevy Torque Converter bolts, 12 point 1/4" high head, 3/8 -24 x 3/4, ARP part# 230-7301, 200,000 psi. This is a kit with washers and shouldered nuts, which are not used, but may come in handy as spares, elsewhere.
You might be able to get just the bolts from ARP although they will not sell to you directly. The good thing about ARP230-7301 is that they are easy to find in local speed shops. There are 3 bolts per kit, so two kits are required.
There are no clearance problems since they have the low profile head, and they are STRONG. Don't forget to chamfer the hole under the head in the diff housing flange.

http://www.arp-bolts.com/Catalog/Catalog.html (see p. 63)
http://store.summitracing.com/partdetail.a...15&autoview=sku


XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

good info, thanks dave!

Team Racing

I wish I'd known earlier. I used modified Ford Xflow Flywheel bolts..

4 bolt retainer AND the top web chobbled away at?

Are you trying to get that box to crack V??

Have you ever seen a remote gearbox with thtree bolts? :)
Remote ones don't crack!

maybe remotes have never been tested properly?

Great tip :)

www.shag.no

ah - but don't forget the whippy whoppy torque of a 970 or 1071 engine though LOL!

The taller FD's really show the weakeness of the casing aswell... I might be wrong, but believe that you couldn't get anything taller than a 3.44 back in the sixties?

I'm just not sure how the older trans is that much stronger - unless I'm missing something?

"whippy whoppy torque" LOL!

I've seen the future and tbh its Pie

I can't think what the remote casings look like inside. Is the centre web any thicker / stronger in appearance?

I'm pretty sure that alumimum alloys / casting technology was better in the late 70's / 80's than the sixties... But that's not to say the cash-starved British Leyland / AR actually utilised this technology - so that could well be a very valid argument. :)

Edited by TurboDave16V on 29th Sep, 2006.

Manchester Minis

i'll get some pics up as i have an expample of all the different cases

I've seen the future and tbh its Pie

not wanting to piss on your fire dave, but i use Finnings . high strength bolts .SEA grade 8 min .
and pennies to buy,


carl

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

Piss away Carl. But that isn't a lot of information for anyone else to follow up on... How about you put up more info :)

Just ordered a set (2 set realy) and a set of Ford BB con rod bolts I have heard will fit my S :)

www.shag.no

are you suggesting i actually look up part numbers from there catalogue??lol.

that could take years ,but i'll see what i can do,

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

well heres the part numbers of the bolts in question,
just so we are taslking about the same thread size,
i use 3/8 unfx3/4" long. although 3/4" is longer than needed it passes into an area where it cannot foul anything.

3/4 long part no OLO372,
5/8 long part no OTO642.

if needed you will have to look up your local yellow pages for your nearest depot,and by my info there is only nine in the uk,
if anyone is stuck for some i'll happily buy a rake and site on them,
it'll cost you what they cost me plus one beer,lol.


carl
carl

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

carl, please can you get me some, just enough for one Crown wheel

Team Racing

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

no half!

oh ok then!!

I'll look after you buddy

Team Racing

how desperate are you , it'll be next week before i can get in to them

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE

no rush mate, it will be for the winter gearbox build

Team Racing