| Page: |
| Home > FAQ / Knowledge > Cheap / available LSD crownwheel bolt info. | |||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
18th Oct, 2006 at 09:29:18am
On 16th of Oct, 2006 at 09:41pm vegar said:
Just ordered a set (2 set realy) and a set of Ford BB con rod bolts I have heard will fit my S :) Well, the jury still hasn't decided whether these are a straight fit or if mods are needed. Have a look on the Minimania board. On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
 520 Posts Member #: 189 Post Whore Norway |
18th Oct, 2006 at 08:55:43pm
I know. It was at Minimania I first seen it. But Madmat are using it in al his engines, so I just ordered a set to try out. It is cheap, and if they dont fit I just sell them to some Amcarpeople :) It is just for the S engines I have heard, but thats no problem since it is for my historic racer.
www.shag.no |
||||||
|
520 Posts Member #: 189 Post Whore Norway |
18th Oct, 2006 at 09:11:55pm
Had to try it out, looks like it will work just fine. The ARPs are the same dimensiones as the ones on my rods :) www.shag.no |
||||||
| Home > FAQ / Knowledge > Cheap / available LSD crownwheel bolt info. | |||||||
|
|||||||
| Page: |