Page:
Home > General Chat > Turbo conversion

Alexmini

3 Posts
Member #: 10542
Junior Member

3rd Aug, 2013 at 06:57:54pm

Hi guys :)
Basically i have a 1310 fast road engine with around 90 horses, but i want more!
I wouldnt be able to do the turbo conversion myself so are there any places where i could take my mini and get it all done and set up properly? Preferably around the west midlands area...
Cheers guys

Edited by Alexmini on 3rd Aug, 2013.


wng691s clubby

User Avatar

2057 Posts
Member #: 9252
Post Whore

Cleethorpes

3rd Aug, 2013 at 07:03:29pm

pm benross (steve) im sure he could build you and engine

Done now needs redoing lol

WRLondon

User Avatar

1170 Posts
Member #: 8636
Post Whore

Surrey

3rd Aug, 2013 at 08:40:21pm

Depending on what camshaft your using just need all the turbo gibbons and a decent head

Reading up on RTS Clutches

On 21st Sep, 2006 Paul S said:
Go on, be brave, put it in the car and tell us how it works.
Pity your bollocks are in line with the flywheel!
On 27th May, 2013 robert said:
putting my testicles on the line for turbo mini owners everywhere ,and they still work !

Alexmini

3 Posts
Member #: 10542
Junior Member

5th Aug, 2013 at 10:01:27pm

SW5 cam

kappa

882 Posts
Member #: 9854
Post Whore

Hounslow, Middlesex

5th Aug, 2013 at 10:58:37pm

Or you can buy mine?

WRLondon

User Avatar

1170 Posts
Member #: 8636
Post Whore

Surrey

6th Aug, 2013 at 12:23:24pm

Or you can buy mine?
Lol

Swiftune SW5

Checking height: 0.016" @ lobe

Timing: (Intake): 16/48 (Exhaust): 52/12

Nominal lobe lift: (Intake): 0.281" (Exhaust): 0.281"

Duration (Intake): 244 (Exhaust): 244

Lobe centre angle (Intake): 106 (Exhaust): 110

Lobe separation angle: 108

Lift on overlap: 0.036"

Accuracy: Good

would be ok, id bolt on the head and turbo etc. see how it goes but if the engines coming out anyway
go with a phase 2 cam
(avonbar or MED)

EDIT avonbar arent really about anymore, its AVR classics

Edited by WRLondon on 6th Aug, 2013.

Reading up on RTS Clutches

On 21st Sep, 2006 Paul S said:
Go on, be brave, put it in the car and tell us how it works.
Pity your bollocks are in line with the flywheel!
On 27th May, 2013 robert said:
putting my testicles on the line for turbo mini owners everywhere ,and they still work !

Alexmini

3 Posts
Member #: 10542
Junior Member

6th Aug, 2013 at 08:16:29pm

So where would i have it done?

kappa

882 Posts
Member #: 9854
Post Whore

Hounslow, Middlesex

6th Aug, 2013 at 10:03:40pm

I have been in sales, so just trying to sell, lol


On 6th Aug, 2013 WRLondon said:
Or you can buy mine?
Lol

Swiftune SW5

Checking height: 0.016" @ lobe

Timing: (Intake): 16/48 (Exhaust): 52/12

Nominal lobe lift: (Intake): 0.281" (Exhaust): 0.281"

Duration (Intake): 244 (Exhaust): 244

Lobe centre angle (Intake): 106 (Exhaust): 110

Lobe separation angle: 108

Lift on overlap: 0.036"

Accuracy: Good

would be ok, id bolt on the head and turbo etc. see how it goes but if the engines coming out anyway
go with a phase 2 cam
(avonbar or MED)

EDIT avonbar arent really about anymore, its AVR classics
Home > General Chat > Turbo conversion
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: