Mirage manifolds contact number?
Turbo Mini Forums

I new to get hold of someone from mirage does anyone have a contact number for them?

Thanks

Benross can get these now I think give him a PM

Just pm'd him

Can he get the manifolds?

Thanks

wait for the reply and see

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

oooohhhhhh hope Benross can may turbo mini if he can

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile

He can't :L

Only makes the manifold before the turbo for the gt17

Steve can get the manifolds as he is getting me one ! Not sure how long you will have to wait for it though ,

would be interested as well if a supply is going to be available at some point in the future.

Double-Blind experiment, N:
An experiment in which the Chief Researcher believes he is
Fooling both the subject and the lab assistant. Often accompanied by
a belief in the Tooth Fairy.

Who's Steve? And how much is he asking?

Mirage number used to be 01953 888936, not sure if that's still the case though

Steve Who, really interested if he can get them.

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile

im still making the gt17 manifolds. I've just finished a batch which are all spoken for, but making another batch soon.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Steve = Benross

http://www.twin-turbo.co.uk
http://www.hillclimbandsprint.co.uk/default.asp

A man without a project is like a like a woman without a shopping list.

do you need to modify the bulk head to fit the GT17?
what price are they?

interested if i dont have to cut the bulk head

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile

Not with a fatty manifold lee! But you may have to skim a little out of the back of the block above the mechanical fuel pump but nothing too scary!!

I may be doing a couple in a month, so will let you know coopdog,

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Dam! I bet that makes the oil drain woo much easier too!

How much are your manifolds matty?

Flat oot like a dukes fit!

Sounds good, I may be interested in one Matty. Would be a good upgrade from my t2

On 20th Aug, 2013 matty said:

On 20th Aug, 2013 jamiestevenbell said:
Not with a fatty manifold lee! But you may have to skim a little out of the back of the block above the mechanical fuel pump but nothing too scary!!

Not any more, I have made a new jig now, and i have managed to move them up a further 20mm to allow more block clearance and allows an easier fitment for the oil drain too.

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile

Reading up on RTS Clutches

They are £250 posted. I'm looking at doing some down pipes now too, as my engine is out I can mock one up then make some jigs. Just trying to source some parts to make them now.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Would the down pipes be stainless and for the gt17 matty? I'll let you know when my manifold arrives :)

Hopefully! It all depends on cost and availability of bends and flexi joints in stainless etc..

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi