MY MATES MINI TURBO 0-60 HELP?
Turbo Mini Forums

MY MATE HAS/ IS BUILDING A MINI TURBO -IT HAS NOBBIE'S OLD ENGINE IN IT.
WHAT DO YOU GUY'S THINK HIS 0-60 WILL BE. (ESSTIMATE)
IT IS STRIPPED OUT BUT IS FITTED WITH A ZEEMAX BODY KIT.

ANY IDEAS LADS.
I WANT TO KNOW BEFORE I RACE HIM, WHEN HIS IS BUILT OF COURSE.

What gearbox?
What diff ratio?

What was the engine spec?

ill be running it at 12psi, with intercooler. wont be able to tell bhp until its built but i'll wave as i go past u!!! lmao

Andy

MINITURBOMAN IS THE KID WHO IS BUILDING IT BY THE WAY- WHATS YOUR ENGINE SPEC THEN ANDY.

this is wat it sed wen i bought it:

"mini turbo engine

running when removed, in good condition, has ARP head bolts and studs, drilled head and block for 11 stud, with non verto clutch conversion and new clutch plate with grey diagram, phase 2 turbo piper cam, new oil pump and followers, block has been skimmed, gearbox reconditioned, with cross pin diff. rods crank piston and flywheel all balanced, it has no water pump or alternator blah de blah de blah" (i added the blahs)

bought of ebay for ?360

THERE YOU GO THEN LADS,
PLACE YOUR BETS NOW

HIGH 7.0s-8 MABEY.

Only if you stop typing in caps.

0-60 won't be too impressive with the standard transmission... 1st is way too short for the torque of a turbo.
I'd say high sevens.

Stick a SC transmission in there, along with a 3.44 diff, and you'll take almost a second off the 0-60 sprint (probably). The difference feels even more so in driving...

id like to see miniturbomans motor

DAVE, while you touched the subject
what would be the ultimate box diff ratio etc,etc, for 1/4 mile ????????????

all iam running at the moment is standard ratio helical box with drops and 4 pin diff.
what would you go for if given a blank cheque?

Edited by BENROSS on 28th Jan, 2005.

Ha ha ha!
The blank cheque situation eh?

Well I'm not able to launch in 2nd in my mini, but 1st feels too short for the power I have...
So, somewhere between the two! The metro challenge box had a 2.3:1 first, compared to 2.54:1 for a conventional SC gearset.
This would be a good starting point.
Jim is running one of these, and i'm eager to have a run in his mini at avon - it had a very similar engine spec and power delivery to mine... It could be that a 2.3:1 first is still not enough - so maybe a 2.1 first? Who knows?

Then again, If I had a lighter car, and a little more torque, and it was just a drag-racer, i'd use a slightly wider three-speed only!

For anyone who has a standard helical A+ transmission, for a quick time on the strip, you need to be launching in 2nd - with as much boost as you can manage in order to prevent the engine bogging down and to get to the finish as quick as poss. Chances are, you'll send gears out of your transmission or fry your clutch if you do this too many times however...


Only my own personal thoughts, but I'm sure flan the man and Miniwilliams would agree that first gear just isn't long enough sometimes....

Edited by turbodave16v on 28th Jan, 2005.

thanks for input dave

The metro challenge box had a 2.3:1 first, compared to 2.54:1 for a conventional SC gearset.



Lucky I bought one of them then

Metro turbo weekend driver,Mini turbo in the making again!

there seems to be many challenge boxes comming out of the wood work. i thought i had the only two left. Iain, any news on those new ones, where they from Morris Fowler?

Team www.sheepspeed.com Racing

I wouldn't have said all that If i was still in the UK and ready for re-taking the first place Avon Park trophy...

Looks like competition will be good this year:

Andy Cameron
Jon flanigan
Jim Lyons
Tim turbo
Mark Haswell
Wil/Ben Hamer

ALL the above will be pulling in sub14 times I reckon, and ALL have Drag Racing experience - which is essential...

Edited by turbodave16v on 28th Jan, 2005.

Excuse me for asking but how can You tell if it is a bonafied challange box.I bought it as a rover sport box out of a green/white metro used at castle coombe,the bloke was going hillclimbing so put a differant box in

Thanks Brian

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...item=4504342787

Still working on the engine

Edited by Dangerous on 28th Jan, 2005.

Metro turbo weekend driver,Mini turbo in the making again!

you have to count the teeth...

Jim is the guy to ask for the numbers...

ps - I'd hope for ?400 it is a 'challenge' box! A brand-New gearset is less than that isn't it?

Edited by turbodave16v on 28th Jan, 2005.

i have a challenge gearset in my kitchen (like you do) I'll count the teeth in the morning for you, count yours and we'll post results

Team www.sheepspeed.com Racing

Andy Cameron
Jon flanigan
Jim Lyons
Tim turbo
Mark Haswell
Wil/Ben Hamer

i hope thats not the correct order dave .and after i`ve spent all this money ( ie UCK ALL) on trying to win that bloody , poxy plastic trohpy, this will be the 11th showdown and my 10th bloody attempt at it , and i`m sick of buying cars to try and win......

Everyone knows that instructions only have to be read if the thing doesn't work....

your problem mark is going to bed to early on the saterday night and missing out on the beer

Team www.sheepspeed.com Racing

Sorry my Northern friend, I should have written No particular order - After all, Andy C has yet to dip into the 14's at Avon i believe?

no , he was the first to do it , and the first to braek 100 mph

Everyone knows that instructions only have to be read if the thing doesn't work....

challange box i had one to Jim, sold it in the end not nice with a 2.9.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com

2.9 diff AND a challenge box? wow!

Was that with the turbo or the 1380? I imagine it must've been a nightmare if with the latter!!!