Page:
Home > Wanted > brake limiter valve

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

7th Feb, 2006 at 01:02:09pm

one of these

http://www.minispares.com/Product.aspx?pid=37054

I object to paying £80 for one.

A 'known good' one ideally.

Cheers

Wil

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


Nick
Forum Mod

User Avatar

4828 Posts
Member #: 154
Post Whore

Midlands

7th Feb, 2006 at 01:17:41pm

think ive got one in the garage dude, i'll have a check tonight to make sure.

On 20th Oct, 2015 Tom Fenton said:
Well here is the news, you are not welcome here, FUCK OFF.

Jimster
Site Admin

User Avatar

9408 Posts
Member #: 58
455bhp per ton <BR>12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

7th Feb, 2006 at 02:17:56pm

I'll have a look too

Team www.sheepspeed.com Racing

On 15th May, 2009 TurboDave said:
I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? directbackup.net one extra month free for all Turbo minis members, PM me for detials

turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

7th Feb, 2006 at 04:56:59pm

Aren't there a few different types?

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY



Carl

User Avatar

2924 Posts
Member #: 95
Post Whore

liverpool-on-sea

7th Feb, 2006 at 09:15:36pm

i also have one you can have for free if you want it. was ok when removed a couple of years ago

i thought youd be fitting an adjustable bias valve tho?

no longer a series, but still 1.3 turbo.

On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl.

Nick
Forum Mod

User Avatar

4828 Posts
Member #: 154
Post Whore

Midlands

7th Feb, 2006 at 11:27:44pm

dug it out earlier wil and its really manky, i wouldn't trust it personally looking at the state of it...

probably worth seeing if one of the other chaps has in one in better condition.

On 20th Oct, 2015 Tom Fenton said:
Well here is the news, you are not welcome here, FUCK OFF.

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

8th Feb, 2006 at 06:26:33am

Carl, I'd be happy to take it off your hands, but let me give you something for it.

As for a bias vale. We've discussed it, but the brakes as they are work fine. If we put some adjustment in we could get it wrong. And we just don't have enough time to test different settings.

Dave, yes, there are two different types I think. the one on the link and another which has a switch in it to indicate duff circuits.

Edited by wil_h on 8th Feb, 2006.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


Tom Fenton
Site Admin

User Avatar

15302 Posts
Member #: 337
Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner <p>&<p>TM legend.

Rotherham South Yorkshire

8th Feb, 2006 at 09:17:49am

Wil, the only comment I would have is that the standard bias valve limits the rear brakes a bit much to give you optimum braking efficiency. On one of my old road Minis I removed this valve, piped the front brakes direct, and then had a "tilton" screw type valve in the line to the rear brakes. The brakes after doing this were MUCH improved.
Maybe something to think about for a future mod, as you point out you would need at least a good blast up and down somewhere to set them up initially.


On 29th Nov, 2016 madmk1 said:

On 28th Nov, 2016 Rob Gavin said:
 I refuse to pay for anything else


Like fuel 😂😂

Carl

User Avatar

2924 Posts
Member #: 95
Post Whore

liverpool-on-sea

9th Feb, 2006 at 06:24:59pm

wil you can have it for free onest its just sat around getting in the way. i cant garentee its conditon obviously. BUT it was working absoultely perfectly when it was removed from my 93 mini a couple of years ago.
pm me your address and ill pop it in the post for you.*smiley*

no longer a series, but still 1.3 turbo.

On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl.

cheekym0nkey

User Avatar

102 Posts
Member #: 180
Advanced Member

Northants

15th Feb, 2006 at 03:45:41pm

I've a good one here if its anyuse! Can have it for free aswell and can even drop off to ben_h if thats any use aswell as he's not far from me if he's in market harbourogh.

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

15th Feb, 2006 at 03:56:52pm

Cheers cheekymonkey, but sorted it now.

Wil

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.

Home > Wanted > brake limiter valve
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: