1293cc Stage 2 Turbo Intercooled with SCCR Gearbox.
Turbo Mini Forums

Selling my complete setup :( Pics will be added ASAP. Specs below, please note this engine and box have never been run so its still machineshop fresh inside. I'm asking £2500 as it is, will judge interest before deciding if i'll split it all up. It's difficult to judge value so if you think its not reasonable please do make sensible offers! Located in West Sussex, can offer delivery at £1 a mile if within 30 miles ish.


Engine
1293cc Stage 2 Turbo.
Cooper S rods shotpeened and balanced.
Dished de-skirted pistons.
Lightened, balanced and bladed crank.
Avonbar Phase 2 cam.
2 Bolt centre main strap.
Lightened and balanced flywheel.
Lightened and balanced backplate.
Orange springless clutch.
11 Stud block.
Duplex vernier chain.
1.3 (i think, or 1.5, will check) Roller tip rockers.
MED Engineering Stage 2 Turbo head, 11 Stud, new guides.
Garrett T3 Turbocharger, rebuilt and balanced.
Avonbar Forge dump valve.
Avonbar billet actuator.
12 PSI needle and float chamber mod.
In-car adjustable boost controller.
Modified springless plenum with intercooler takeoff.
Ford Series 2 Escort RS Turbo intercooler.
MG Metro front mounted radiator.
11 Row oil cooler.
Alloy rocker cover.

Gearbox
Morspeed 1:1 Straight cut drop/transfer gears.
4 Syncro full straight cut gearbox.
Centre oil pickup.
Metro Turbo final drive.
Minispares offset 'Evolution' 4 pin differential.
Avonbar quickshift

Thanks for looking :)

i will be interested in the phase 2 cam if seperating

Sounds like a fair price to me

Drops for me if you split mate

If you split I'll take the gear box cash waiting

I would be interested in the T3
Steve

Would be very interested in a most of the short engine if you decide to split. Where did you get the clutch components from are they new too?

Looks like there is more interest to split mate... Sure you will make more that way too 8-)

i think as with iains mig sale thread, splitting is the fastest way to sell

i too would be interested in the short block if you split
or the 4 pin diff if PaulH doesnt want it with the gearbox

Yes i moved to the darkside

Instagram @jdm_brett

thanks for the feedback guys. I am tempted to split and being realist I think you are right. I'm just waiting for some combacks from a few locals and if they dont want the lot i think i'll split it into geabox / block / head / turbo in the next few days.

Interested in the actuator and needle...

ok here goes... I'm going to split it into the following...

Stg2 Turbo Head with 1.3 Roller tip rockers, 27cc chambers from memory, trying to find documentation. Stamped with MED serial number so have emailed them to see if they can confirm too - £400
Turbo + Inlet Manifold + modded plenum & carb with needle and spring etc - £250
Short Block with flywheel, orange clutch, casing, toothed crank and KAD crank sensor bracket and pickup etc. Pistons stamped with model, will note when take pics - £750
SCCR Gearbox & 4pin Diff - £650
SC Drop Gears inc Primary - £180
MegaJolt + unused loom kit and shiftlight - £90
2x Unused Turbo Exhaust Downpipes with knuckle joint- £25 each

Sure i've got some more stuff to sell but i'll let you flame me for the prices above first lol. :)

I'll back out of the gearbox but I will take the mega jolt kit

I'm interested in your head.

How much will cost shipping to holland?

Also interested in the billet actuator

Regards maikel

Where in sussex are you mate?
pmed

Edited by EssexSteve on 19th Jan, 2010.

K, PaulH has the MegaJolt...

Maikel, can your PM me your address so I can calculate shipping costs please.

Steve has 1st dibs on Turbo

. forget what I said, Just checked out the bank balance and its not pretty

Edited by minimole23 on 19th Jan, 2010.

interested in plenum if you split if you split carb inlet plenum

Jack Jones

intercooler and pipes up for grabs? 8-)

k, most stuff sold/selling. Anyone interested in the main two parts?

SCCR Gearbox & 4pin Diff - Now £550

Short Block with flywheel, orange clutch, casing, toothed crank and KAD crank sensor bracket and pickup etc, dished pistons - Now £650

£100 off each. Paypal good for me.

mike what gearset is in the box and do you know what make / number the pistons are? i might have some cash by the weekend thats all

Yes i moved to the darkside

Instagram @jdm_brett

I honestly couldnt say what set they are to be honest, if there is a way to tell let me know and i'll go count some teeth or something - i'm taking pics saturday morning, the earliest i can get out there i'm afraid.

The pistons I have remembered are Hepolite, again i'll post the number Saturday morning.

Just for information, I am in Oxted, Surrey 3-4 days a week, so if anyone wants to collect, its 50 miles closer than Worthing!

you have pm re the pipes mate