Maniflow Vs. PlayMini
Turbo Mini Forums

mine is a little diffrent to the miglias.

maniflow stage 2 lcb that does not rejoin at the y peice, two pipes go to reverse maniflow megaphone silencers then to the two backboxes mounted in the centre.


my modified rc40 system failed a noise test.

stage 2 maniflow without the reverse megaphone silencer failed a noise test.

this one is 98 point something.

Edited by Sam on 28th Aug, 2008.

OK, so nothing to do with Miglias then...

same back boxes.

Miglias don't use Maniflow Megaphone silencers. They use 1 7/8" Rover ones or were they 1.625"?

okay so maniflow miglia back boxes then :)

Someone appears to be talking bollards here.

from the front backwards

maniflow stage 2 lcb

two reducer cones

two megaphones silencers

two back boxes with an entry into the centre of the box and the exit on the side of the box.


this know all end all attitude gets on my nerves.

What do you want? The truth ... or a cuddle?

In the 13's at last!.. Just

not really oel, i see the back end of the car im building every day i open up the garage door, i think i should know what parts are on it.

like i said know all end all attitude.

I was going to say only people with tits get a cuddle, then i saw your av...

oi!

il get you!!!!
lol

Form an orderly queue...

There's enough love for everyone.

In the 13's at last!.. Just

they are great waps!!

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

this thread has gone off on some what of a tangent.

it appears that maniflow are favoured for thier down pipes and manifolds however play mini is favoured for the rest.

Schrödinger's cat - so which one am I ???

id like to know why though?

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Hi,
I'd imagine it to be something to do with the tuned length of the exhaust system?
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

if you look at a mini spares stage two manifold and a maniflow stage 2 manifold

both lcb`s.

the manifold for the centre section is a bigger bore eg buldged in the pipe then goes back to a normall bore.

i suspect a better design.

I checked the regs vegard, you are right

Team www.sheepspeed.com Racing

i dident think they are bad, they seem okay with my 1293 flowing through them.

so the conclusion is that they are shite and i should change them for something else.

they were the only decently flowing ones that i could find that would keep the noise levels down.

ill be hitting the strip with it in 2010 how lenient are they on the 101 db reading thing at drag strips?

Hi,
If the twinnie passes the noise test anything will!
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

i heard that thing, fook me.

mine passes all tests and flows enough for 180bhp, i have two very cut down rc40's, so its nice and quiet. If it flows that much i'm leaving it alone. Just because something is expensive (miglia system) doesn't mean its ideal for your (general) setup?

"Cars are a lifetime of pain"

it wasent that expensive for me.

a mate of mine picked up the bits and he gets a fair wack of discount.

all in all it probably cost me less then 200 pounds.