Engine starts but cuts out-fuelling problem help please!!
Turbo Mini Forums

Ahh oki doki.

Im getting 13.1 across 1+4

13.2 across 2+3

sounds ok,

it was probably 20k including the leads

With the leads

1+4 = 31

2+3 = 31

You should also get about 0.7 Ohms between the centre pin and either of the outer pins on the 3 pin socket of the coil.

Sound slike your EDIS module may be the culprit though.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."

Come round and get my edis module, see if that works while there is still light, asshole.

Edited by Ben. on 10th May, 2009.

Build Thread Click Here

Thanks paul.

Yeah im getting 0.08 across either of the pins and the centre 12v pin.

Hmmm edis module eh, does the description I gave of the pip/saw under cranking sound about right?

0.08 Ohms is too low.

I now suspect the coil.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."

Rich has just left my house with my edis module, unfortunatly my coil has a different connector to his so he cant check that.

Edited by Ben. on 10th May, 2009.

Build Thread Click Here

Hmmmm


























Haha, I plugged the edis in and was looking at the megajolt software when my hand turned the key over crank, me not paying attention it instantly fired into life!!!

Crapped myself, partly with joy and fear :):)

It sounds lovely and idles really well considering ive barely touched the carb settings since I rebuilt it.

Might sound soppy but i'd like to thank everyone for their help over the past 4 years (been building it since I was 18!!), and i've waited to hear it running ever since I started stripping the standard engine down, so thanks alot!!!

I'm beaming, fired it up twice but didnt run it very long, need some antifreeze and to hook up the choke so I can bed the cam in tomorrow.


Awwwesome.

YEEEAAAHHHHH!!!!

Whaaaaat.

Build Thread Click Here

That's good to hear.

Cheers guys feels awesome!!

Time for a pint.

congrats mate

Good job.

glad to help and well done!!!! its a great feeling init

Well in Rich - get some vids up!!

Bravo!!!!

Haha I like your awards style thank you speech, could you please cry as you say it next time

Build Thread Click Here

oops double post.

I cant wait till all of you see my temporary intercooler aswell.

Edited by richminiturbo. on 10th May, 2009.

Then you went and ruined it all with a double post

dirty boy!

Congrats mate. you'll be on the road in no time.

Good work, it is always a nice feeling when a new engine fires up for the first time, as it goes today has been a good day for it as I've started up my new 205 turbo engine for the first time too.