needle valve
Turbo Mini Forums

Did a SEARCH, but didn't answer my question :)
Anyway, ive upgraded my dash spring, so should i upgrade to a Modified Needle Valve from avonbar ?
As Ill be running at 7 to 10 (PSI) Or would that only be for car's Above 10PSI ?
Cheer's :)

Shit Happen's

Looking at the avonbar website I guess your meaning the needle in the float chamber rather than a carb needle?

Yeah that's right.
If you look at number (5) on here----
http://www.burlen.co.uk/partList.aspx?carbSpec=FZX%201435

You might have to copy and past it the link, coz when i press preview, then pressed the link, it took me else where on there site.
If not like i said, copy and past.

They call it a Needle Valve.
Avonbay do a Modified one to allow more fuel. just wandered if i needed 1, or the standard one ok ?

Shit Happen's

Hi,
I think you'll need to be past 12psi before you've got to worry about it, but it depends on engine spec as much as boost pressure....
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

hi

I have read into this as I am planning on building my engine soon and they say that you need to go past 12psi before you start messing about with things like that

when i drove a 10" wheeled Mini last it felt insane !