Few bits still needed - handbrake bits
Turbo Mini Forums

See the last post:

Basically:

Subframe guide if soemone wants to cut one off

Guides that go on the radius amrs apparently

Brackets that are on the exhaust tunnel for the handbrake



Think thats it all! cheers!

Edited by iain on 26th Jun, 2007.

The cable guide is usually part of the subframe - might be difficult to get hold of if yours has been removed.

1573wx had a few wiper motors kicking about IIRC?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

I've got a couple of old standard hand brake quadrants you can have, but I won't be able to get them for a week or two.

Cheers for the offer rob.

I've ordered all new bits from minispares, only do it once i guess! lol!

I do need still need a guide off the subframe if possible, the handbrake lever brackets off a shell, and apparently some sort of guides on the radius arms?

Hoping to fit it all this weekend and i can make bits up but its easier if anyone has any bits?

Cheers
Iain

If you give miniclassics a call in bawtry (near worksop) and speak to john he'll probably let you go down and cut what you need off a scrap shell, can get number if you want. Not sure what the guides on the radius arm are though, sure they just have the quadrants.

Also there is a kad fly-off handbrake on e-bay if you're intersted

ook fella, cheers.

I'm short on time so thought i'd check if anyone was cutting up a shell here first. cheers for pointing it out though. do you mean blyth though?

I'm not sure on the guides, just something Rich at minispares mentioned.

Hi,
The guides are the bit on the front edge of the subframe, in the middle. where the cables turn toward the radius arm quadrants.
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

thought he said there was something on the radius arm but must not have been listening.

not sure if that bit has been ground off, soon make something up i guess if it has although one chopped off and welded back on would be easier!

Hi,
One the radius arm you've got the quadrant.
Bolted on to the backplate is the spring retainer bracket, which the cable goes through then connects to the drum linkage.
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

i'm sorted then bar the handbrake mounting brackets and the subby bit

hopefully get it all in over the weekend. if i havent got any brackets by then i'll make some up.

Yes Blyth, on the A1. I didn't notice Bawtry was wrong till you pointed it out though!

yeh sorry mate it is blyth, if you give him a call he may cut them off for you, i could pick them up and stick them in the post so you know there on there way, should be with you by the weekend.

Cheers mate. I'll try a place near work today first to save you the trouble but if not that would be very good of you.

Although if he's open saturday's i may pop over as its not far.