plenum modifications and welding...
Turbo Mini Forums

as i am going to be getting my welding done soon fingers crossed, what bits of the plenum need to be welded i already ahve a bov take off on my plenum but do you need to weld over the bleed valve? im planning on running about 8-10 psi if a nearly standard rebuild engine can take that anyway.
back on subject which areas need to be welded? is it just the bleed valve section and the bov exit port?

yours paul

(ps i did look for clues on the search engine but only found bit about the bov take off)

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

Hi,
Yes weld the bugger up! Also get the inlet pipe modded if you're having an I/C.
Giallofly on here does them exchange for not a lot of money
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

ta very much :) keeping TM and the users in business :)

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis