Injector O rings
Turbo Mini Forums

Where's the best place to buy injector O rings? Is it the sort of thing most motor factors would do? There for Bosch injectors.

Also has anyone experienced swelling of the O rings at all, or is this what generally happens over time?

Cheers
Matt

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Industry place might be able to get you em.

BSL is one supplier we use for bearings seals and other bits and bobs
http://www.brammer.biz/uk.aspx

Back once again like a renegade master

Ah, looks like their website is playing up.
But tell em size and shape and im sure they'll sort you out with them.

Edited by Jordan on 21st Apr, 2008.

Back once again like a renegade master

Hi,
They're usually a bit oversize, a smidgen of grease will ease them back in
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

Yeah ive tried grease and they won't go back in!

One of the O ring was leaking, for some reason one injector location is looser than the others, so im hoping a new O ring will sort it out. Ive also manged to take a nick out of one of the others when putting it back in!

Are they made out of Kalrez?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

I have some used one spare, they came from two sets of injectors that i had cleaned, so im sure theres at least a couple decent useble ones in that lot, 16 in total, would you believe

oh and the o rings will likely be Neoprene

i can get you these if you want? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...rksid=p3907.m32

matt if you grease your ring and cant achieve penetration , how bout relaxing and trying later with less pressure ?

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

[quote=miniboo,22nd Apr, 2008]i can get you these if you want? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...rksid=p3907.m32[/quote

Those ones are Viton? Never seen them on injectors before!

I went round god knows how many places today and no luck!

I only really need 1 or 2 as only one injector is leaking, for some reason its fit is not quite as snug as the rest?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Edited by Nic on 22nd Apr, 2008.

Lol..imagine the mess if I didn't use lube!

Turns out my O rings aren't too bad its the clips that retain the injectors that are the problem, not holding the injector in tight enough!

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

peugeot use bosh injectors so may have the 0rings you need

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis