gt17 1752 v band fitting.
Turbo Mini Forums

Hi.

the v band needed fot fit a gt17 seems quite dear.

how have the users of v band turbo's coped.. just shelled out for the clamp or devised a alternative

i guess if bought in small bulk it would be a bit more sensible...

That sir, is not rust, it is the progressive mass reduction system

http://aseriesmodifications.wordpress.com/

my solution for this is in the gt17 thread .have a look?

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

Hi,
I'm thinking of getting a 60mm alloy hose joiner tigged on the end, job done :)
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

I used a piece of 63mm samco on mine.

Ive been looking at this, im just going to fit a samco straight on the end with a jubilee clip. I swear it measured 70mm though?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Had 63mm in my mind but its was the same size as the 2wd cosworth intercooler pipes as that is what i nicked it off!