Page:
Home > Technical Chat > OIL TEMP GUAGE MECHANICAL

greymini78

141 Posts
Member #: 2408
Advanced Member

surrey / ewell area.

16th May, 2008 at 02:22:25pm

I would like to plumb in my temp gauge inline b4 oil cooler on oil cooler hose. if i could get a brass t piece could i cut the hose and fit the t piece here as i dont really fancy losing the sump magnet or putting one in the pick up pipe area , any ideas?


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

16th May, 2008 at 05:41:55pm

Those who search will find:

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=4368

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.
Home > Technical Chat > OIL TEMP GUAGE MECHANICAL
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: