Page:
Home > Wanted > Ph 2 cam

Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

25th Aug, 2008 at 04:00:30pm

I was planning to get a new one but avonbar are only doing them from billets for 200 quid now due to a lack of cams to grind.

So unlikly I know but does anyone have one they would part with, perhaps from doing a K conversion.

Cheers.

Joe.

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

25th Aug, 2008 at 05:01:03pm

I could get you some spider blanks if you are prepared to use this.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

Jay#2

User Avatar

2500 Posts
Member #: 648
Post Whore

Northern Ireland (ex AUS)

25th Aug, 2008 at 05:16:21pm

MED do a T3 cam that seems similar to a ph2. At least to my untrained eye.

There is cam specs on this thread.

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=121020

Edited by Jay#2 on 25th Aug, 2008.

On 7th Nov, 2008 Nic said:
naeJ
m
!!!!!!sdrawkcab si gnihtyreve ?droabyekym ot deneppah sah tahw ayhwdd


Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

25th Aug, 2008 at 06:36:55pm

V, really I want to run a turbo pump,

I was looking at the MED cam earlier...

Hmmm choices,

Run the spider 266 i have and sort out a oil pump adaptor for the turbo pump, run a std metro cam, Run an MED cam or fork out 200 notes for a billet.

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



robert

User Avatar

6752 Posts
Member #: 828
Post Whore

uranus

25th Aug, 2008 at 09:37:00pm

optimise it on the 266 and see how it goes ?

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

ministef1

User Avatar

730 Posts
Member #: 1791
Post Whore

Cranleigh, surrey

26th Aug, 2008 at 10:08:36am

i'm using a 266 and have a dyno read out of 180bhp, if thats any help, also really easy to drive and pulls down low.

"Cars are a lifetime of pain"
Home > Wanted > Ph 2 cam
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: