| Page: |
| Home > General Chat > LED inspection light | |||||||
|
Site Admin  15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
6th Oct, 2008 at 04:46:35pm
I'm due a new inspection light for the garage, I'd like one of these new LED type as they seem pretty good, and ideally a rechargeable with a docking station for it to live on.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
 530 Posts Member #: 1192 Post Whore In the garage......again!! |
6th Oct, 2008 at 04:59:15pm
Got a mate who has one of these and they are really bright, probably depends on how much you have to spend Tom.
133.5 bhp 123 lb torque 116mph @6640rpm 9.5psi
|
||||||
|
4018 Posts Member #: 1757 Back to Fucking Tool status Swindon |
6th Oct, 2008 at 05:21:54pm
i have a really good LED torch i use for inspection at work but i use a LED lead lamp in my garage its from halfords though was £24.99 and has about 2m or lead on it very helpful. hopefully helpfull for you
Edited by Paul R on 6th Oct, 2008. Drives
|
||||||
 4559 Posts Member #: 786 Post Whore Bermingum |
6th Oct, 2008 at 06:01:39pm
Hi
VEMs Authorised Installer / Re-seller. K head kits now available!
|
||||||
 5329 Posts Member #: 140 Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place |
6th Oct, 2008 at 07:10:18pm
a mate just bought a "Ring" one, it was much cheaper then the snap on ones he used and it is much better and lasts longer he has now said. Best 1/4 mile 13.2 seconds @116 mph
|
||||||
 2924 Posts Member #: 95 Post Whore liverpool-on-sea |
6th Oct, 2008 at 07:22:22pm
this is mine. cant fault it. i use it everyday, ive dropped loads its still ok. charge lasts ages. not cheap tho
Edited by Carl on 6th Oct, 2008. no longer a series, but still 1.3 turbo.
On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl. |
||||||
 2909 Posts Member #: 83 Post Whore Glasgow, Scotland |
6th Oct, 2008 at 07:27:01pm
On 6th Oct, 2008 Miniwilliams said:
a mate just bought a "Ring" one, it was much cheaper then the snap on ones he used and it is much better and lasts longer he has now said. i use the ring ones in work and jsut bought another for the home, an inspection light (rechargeable LED) usually lasts me about 2 months of abuse till the cases crack, they fall to bits or smoke psihes out them. the wee ring ones are awesome, still got my 1st one, looks a bit shabby now but 6 months and counting, nigh on indestructable good light output and last agees, and are small and light weight :) this: Edited by evolotion on 6th Oct, 2008. turbo 16v k-series 11.9@118.9 :)
|
||||||
|
2909 Posts Member #: 83 Post Whore Glasgow, Scotland |
6th Oct, 2008 at 07:42:43pm
On 6th Oct, 2008 Carl said:
this is mine. cant fault it. i use it everyday, ive dropped loads its still ok. charge lasts ages. not cheap tho http://cgi.ebay.co.uk/NEW-REDASHE-COOLITE-...id=p3286.c0.m14 got one of them too(well one of the other lads does) :) its tough and well built jsut like the wee ring, brighter, but its quite big and heavy! to light a big work area its a better choice, for spot lighting, like working on one particular thing, or in a footwell doing wiring, the ring is better :) turbo 16v k-series 11.9@118.9 :)
|
||||||
|
Site Admin 15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
6th Oct, 2008 at 07:48:11pm
Cheers for the feedback chaps.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
2909 Posts Member #: 83 Post Whore Glasgow, Scotland |
6th Oct, 2008 at 07:58:44pm
the ring one doesnt have a dock if that swings it :), i just love them cause there so strong, im not kind to my tools :( Edited by evolotion on 6th Oct, 2008. turbo 16v k-series 11.9@118.9 :)
|
||||||
|
2924 Posts Member #: 95 Post Whore liverpool-on-sea |
6th Oct, 2008 at 08:06:26pm
On 6th Oct, 2008 Tom Fenton said:
Cheers for the feedback chaps. I'm tempted by the Redashe as these days I tend to spend a bit more on things on the "buy decent buy once" philosophy, and it also has a docking station which I like the idea of, to keep it chraged up without having to plug it in/out all the time. It seems the Ring ones also come recommended, I'll have to have a think about it. if the dock is the same as mine, which it looks like, it has holes in the back to fix on the wall. no longer a series, but still 1.3 turbo.
On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl. |
||||||
 1745 Posts Member #: 375 Post Whore Leicestershire |
6th Oct, 2008 at 10:25:11pm
i have the same one as the redash but under a different name! Cracking piece of kit had it a year and not broke it yet! I use it every day and im a clumsy fecker! Holds it charge well too! |
||||||
|
2496 Posts Member #: 1954 Post Whore Luton Bedfordshire |
7th Oct, 2008 at 12:44:04pm
I just put a LED bulb in my 4cell Mag light. Own the day
|
||||||
 514 Posts Member #: 2169 Post Whore Malta (Ex. Scotland) |
7th Oct, 2008 at 05:15:32pm
On 6th Oct, 2008 evolotion said:
im not kind to my tool :( Hehe 
Warning:Stig in Training
|
||||||
| Home > General Chat > LED inspection light | |||||||
|
|||||||
| Page: |