| Page: |
| Home > Help Needed / General Tech Chat > Undercrown Oil Jets 1380 | |||||||
 10023 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
22nd Oct, 2009 at 02:03:09pm
Quick Q for a future build.
If something is worth doing, it's worth doing half of. |
||||||
 3756 Posts Member #: 1709 I like granny porn. LONDONSHIRE |
22nd Oct, 2009 at 02:19:01pm
do a search......lol
On 2nd Oct, 2009 Vegard said:
On 1st Oct, 2009 Jimster said:
I bet my first wank came quicker than your first mini turbo These new modern turbos with their quick spool up time, would make the competition harder. On 15th Aug, 2011 robert said:
phew!!! thank you brett for smashing in my back doors .( not something i imagined writing... EVER) |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
22nd Oct, 2009 at 02:20:01pm
use the search button On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
|
10023 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
22nd Oct, 2009 at 02:21:47pm
Get bent. I've searched but can't find anyone with them on a 1380! If something is worth doing, it's worth doing half of. |
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
22nd Oct, 2009 at 02:28:48pm
pmsl,
On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
22nd Oct, 2009 at 02:32:35pm
I'll have a natter with the machine shop when I pick the crank up this aft if you want
On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 8604 Posts Member #: 573 Formerly Axel Podland |
22nd Oct, 2009 at 02:35:17pm
On 22nd Oct, 2009 apbellamy said:
I'll have a natter with the machine shop when I pick the crank up this aft if you want Am I right in thinking the basic principle is: make a flat spot next ot the bore drill and tap mounting holes drill feeds into the oil gallories You forgot the bit where you have to dig out the broken drill bit 
Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
|
||||||
 7265 Posts Member #: 1268 The Boom Boom speaker Police! Essex |
22nd Oct, 2009 at 02:38:32pm
You can remove one of those steps if using the bimmer jets. Edited by theoneeyedlizard on 22nd Oct, 2009. In the 13's at last!.. Just |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
22nd Oct, 2009 at 02:42:41pm
On 22nd Oct, 2009 Paul S said:
On 22nd Oct, 2009 apbellamy said:
I'll have a natter with the machine shop when I pick the crank up this aft if you want Am I right in thinking the basic principle is: make a flat spot next ot the bore drill and tap mounting holes drill feeds into the oil gallories You forgot the bit where you have to dig out the broken drill bit Here's me thinking you were an experienced engineer with quality tools Paul
On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 9502 Posts Member #: 1023 Post Whore Doncaster, South Yorkshire |
22nd Oct, 2009 at 02:42:55pm
i seeeem to remember sprocket covering this in his build thread, one has a ball bearing on a spring that shuts off the flow at low oil pressure Yes i moved to the darkside |
||||||
|
10023 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
22nd Oct, 2009 at 02:43:57pm
Thanks mini13! On 22nd Oct, 2009 mini13 said:
pmsl, YEP I'VE GOT THEM ON A 1380 oopsd caps... You offered to loan me the tools for the bimmer jets a while back actually. I may take you up on the offer if its still valid. If something is worth doing, it's worth doing half of. |
||||||
|
9502 Posts Member #: 1023 Post Whore Doncaster, South Yorkshire |
22nd Oct, 2009 at 03:03:43pm
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=5512
Yes i moved to the darkside |
||||||
|
458 Posts Member #: 1840 Senior Member Kings Lynn, Norfolk |
22nd Oct, 2009 at 03:11:20pm
Was gonna make a post about this myself. Just ordered the bimmer jets today. (Part no. 11 11 1 739 907 at £38.41 incl VAT incase you needed it).
|
||||||
|
10023 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
22nd Oct, 2009 at 03:16:05pm
Already read those brett. Just wanted to make sure there was enough material to get them in there with a 1380
On 22nd Oct, 2009 Brett said:
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=5512 http://www.turbo-mini.com/44648/23109.html the first one is a good read :) If something is worth doing, it's worth doing half of. |
||||||
|
8604 Posts Member #: 573 Formerly Axel Podland |
22nd Oct, 2009 at 03:17:55pm
On 22nd Oct, 2009 apbellamy said:
Here's me thinking you were an experienced engineer with quality tools Paul Ah, but you only do the last hole with a pistol drill and you have to judge the angle to hit the main gallery. Slightly off centre and the drill bit will snag as it breaks through. If you are not ready for it, the drill bit can break as it did with me. Luckily I was able to push the broken bit back out from the gallery end :) Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
|
||||||
|
9502 Posts Member #: 1023 Post Whore Doncaster, South Yorkshire |
22nd Oct, 2009 at 03:19:41pm
On 22nd Oct, 2009 minimadmotorman said:
Already read those brett. Just wanted to make sure there was enough material to get them in there with a 1380
Yes i moved to the darkside |
||||||
 1424 Posts Member #: 2810 Formally spanner181187 Dublin, Ireland |
22nd Oct, 2009 at 03:26:45pm
Beemer jets definately look neater and slightly easier to fit. The oil supply and fixture are the same so there is one less step to fit them. I (stood there whilst Paul) fitted Zetec jets to my small bore and it was a pain in the hole On 12th Nov, 2009 Paul S said:
I think Gary OS has taken over my role as the forum smart arse On 30th Apr, 2010 Rod S said:
Gary's description is best |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
22nd Oct, 2009 at 08:41:24pm
no probs as long as i can find them! On 22nd Oct, 2009 minimadmotorman said:
Thanks mini13! On 22nd Oct, 2009 mini13 said:
pmsl, YEP I'VE GOT THEM ON A 1380 oopsd caps... You offered to loan me the tools for the bimmer jets a while back actually. I may take you up on the offer if its still valid. On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
 6274 Posts Member #: 509 Post Whore Isle of Man |
23rd Oct, 2009 at 01:03:55am
id just use a pillar drill as long as its up to the job
"Turbo's make torque, and torque makes fun"
|
||||||
|
458 Posts Member #: 1840 Senior Member Kings Lynn, Norfolk |
23rd Oct, 2009 at 08:27:11am
Thanks for the link to the bits i need, never ventured into milling. My pillar drill looks identical to yours except floor mounted so hopefully i'll get on ok. |
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
23rd Oct, 2009 at 10:43:42am
On 22nd Oct, 2009 Paul S said:
On 22nd Oct, 2009 apbellamy said:
Here's me thinking you were an experienced engineer with quality tools Paul Ah, but you only do the last hole with a pistol drill and you have to judge the angle to hit the main gallery. Slightly off centre and the drill bit will snag as it breaks through. If you are not ready for it, the drill bit can break as it did with me. Luckily I was able to push the broken bit back out from the gallery end :) Those little drill bits are a bastard. I set the clutch on the drill nearly as low as it could go and took roughly 5 min per hole to prevent the same catastrophy. This was after reading your experiences Paul:) On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
23rd Oct, 2009 at 12:19:30pm
Ham fisted fuckers!
On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
23rd Oct, 2009 at 12:52:57pm
What?! you mean you have never broken a drill bit in a hole? On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
23rd Oct, 2009 at 01:54:17pm
nope, never. On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
23rd Oct, 2009 at 02:35:44pm
Clearly not drilled as many holes in a block as I have On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
| Home > Help Needed / General Tech Chat > Undercrown Oil Jets 1380 | |||||||
|
|||||||
| Page: |