Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Help Needed / General Tech Chat > carb linkage

turbo hogster

1641 Posts
Member #: 178
Post Whore

stowmaket suffolk

6th Jan, 2005 at 04:09:02pm

can any of you chapps tell if its ok to swap the throttle linkage from the left hand side to the right like the NA carbs, as i only have a NA throttle plate to us eat the moment.

cheers

always looking for them bigger bunches of bannanas

TurboDave16V
Forum Mod

10979 Posts
Member #: 17
***16***

SouthPark, Colorado

6th Jan, 2005 at 04:28:53pm

No Problem at all. Choke cable gets in the way, but this is easilly fixed by drilling the 'lug' at the top rear of the carb body on the choke spindle side to run the choke cable through. Drill it through with a 1mm drill, then 3/4 through with a 4.5mm drill (or whatever the OD of your cable is) to secure the outer sheave.

You secure the inner cable to the same linkage lever, but use the rearmost hole for the ferule.

I've done this on a few conversions - keeps the choke cable out of the way, and looks very neat.

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY



Jimster
Site Admin

User Avatar

9401 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

6th Jan, 2005 at 05:05:44pm

this is one of TD's conversions,

you can tell this not only by it's neatness, but also the green paint!

Team www.sheepspeed.com Racing

On 15th May, 2009 TurboDave said:
I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? directbackup.net one extra month free for all Turbo minis members, PM me for detials

turbo hogster

1641 Posts
Member #: 178
Post Whore

stowmaket suffolk

7th Jan, 2005 at 09:31:20am

cheers for that guys another job done.

always looking for them bigger bunches of bannanas

Advantage

User Avatar

1137 Posts
Member #: 1450
Post Whore

Near Paris - France

17th Aug, 2008 at 09:40:47pm

Is this TPS used to alter the ignition timing as seen on most bikes ?

Is it one of the functions hence requirements of Megajolt ?

(whow, old post !)

Cheers

Rusty by nature

On 23rd Jun, 2008 paul wiginton said:
They said "That sounds rough mate." I said "Cheers it cost me a fortune to make it sound like that!"


Bat

User Avatar

4559 Posts
Member #: 786
Post Whore

Bermingum

17th Aug, 2008 at 10:12:16pm

Hi,
No, you really want MAP for a forced induction engine *wink*
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary

Home > Help Needed / General Tech Chat > carb linkage
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: