Huge garage clear out!!! List extended Final adjustments!
Turbo Mini Forums

Standard Mini 10" spare with good tyre £9 or £19 posted

Very low milage suspension cones litteraly like new! £9 or £16 posted

Standard Black Bumper £12 or £24 delivered

Pair of Black plastic mirrors good condition missing caps £10 or £15 posted

998cc block pistons with crank no gearbox or head £30/ £70 posted Good condition engine bores are ok no HEAD

Sealed rear side windows with rubbers £10 or £20 posted

Pair of top arms £15 / £25 posted

Boot light £4 / £9 posted

Ultimate engine steady all adjustable £10 each or £16 posted 1 Avalible all for carb 1275 thermostate side

Bulkhead plate £9 / £6 postage

standard Tie rods pair with bottom arms £15 each pair x2 sets avalible postage is about £8

Rear camber brackets ( i believe there 1.5 negative) £15 / postage £5

Hand brake choice of two £9 / postage £5

Steering wheel with boss £19 / postage £7

I also have a Rollcentre 6 point cage for sale with door bars and roof bars which has never been fitted £260 collected postage is £45 to any where in the uk mainland

Wheel arches mayfair rears trimmed to stop before bumper £9 / postage £14


I DO HAVE LOADS OF OTHER SPARES SO IF YOU NEED ANYTHING SEND ME A MESSAGE

Edited by blister on 8th Oct, 2012.

I DO HAVE LOADS OF OTHER SPARES SO IF YOU NEED ANYTHING SEND ME A MESSAGE

Hif44 1 3/4 is that posted mate ?

postage will be £9 for that mate

Price updates and stuff that has sold has been removed

starters pre engaged or inertia? Pre engaged I will have them.

intertia type (one without solenoid)

Wokld you do the hif44 etc for £50 posted ?

just listed it on ebay now mate sorry ebay username 9244billy

Is the boot light the early mk1 type?

My build thread: http://www.turbominis.co.uk/forums/index.php?p=vt&tid=454802

Flickr: http://www.flickr.com/photos/85313398@N02/

PM'd about an engine steady!

responded thank you

Do you have a MK3 front loom for a carb mini uncut? If so how much posted?

What CC is the head?

inertia no good for me, need some pre engaged ta.

The Mk2 loom, what loom is it for? I have a 16v MKII and the main loom has all been hacked around, to convert to turbo I am looking for a more complete MKII loom.

Cheers

do you know which year the MK2 loom came from

i believe it is untouched MG METRO

i was told the loom was from a mk2 but looking at the alternator plug it certainly looks like a mk3 but a few other addition on the loom itself make me think its mk2!

sorry about the delay in responses i just finished my shift of nights at work

LIST UPDATED