Turbo Bulkhead
Turbo Mini Forums

what position of the cross member does it go???

Has anybody got a picture of one?

Where do I start ?

Welcome to the site

Read this ---------> http://www.turbominis.co.uk/forums/index.php?p=vt&tid=3221

Then look at this--------->
http://www.turbominis.co.uk/_photos/random...tos/103/766.jpg

Edited to show picture in thread. Tom.

Edited by Tom Fenton on 6th Jun, 2005.

how come u got 3 fuel lines?

I've used the standard fit injection fuel pipes (as they make a neat jobn underneath and I had all the proper clips/brackets etc for them)

They use the third one as a breather from the tank to the charcoal canister for emissions type shit, I decided to leave all three there to give me a couple of choices of line size if needed, or if not I've got a spare one in the future if I ever want to do something like water injection etc.

aahh. i c

But cut the corner back more than tom has or you'll struggle with your air hose

Hindsight is a wonderful thing! I did that bulkhead box about 6 years ago, when I didn't even know how to use the internet, let alone find anyone else with a Turbo Mini!
Oh well I'll get the engine in and then see how I get on. I've used an injection front subframe so the extra 10mm might just save the day!

here's an old pic of mine Tom. recently found out mines an injection subframe (cheers rover )

although i've done the corner cut you can see how much room there is if you use an adjustable top steady....or a piece of earth wire like in that pic i reckon it'll still be a really tight squeeze though.

Edited by Nick on 7th Jun, 2005.

Id be tempted to give it a bit of a chop mate, honestly it will be tight saves taking the engine in and out a number of times!

I was lucky i found TD's pics when i did mine!

End of the day thats what we created the forum for