Regulators, intercooler, hubs, pulleys, brake servo
Turbo Mini Forums

X2 turbo fuel pressure regulators £20 each posted BOTH SOLD



Ford escort rs turbo intercooler with modified end tanks, fits nicely above the starter motor. £45 posted





Two metro hubs with early ball joints fitted (same as mini taper). Come with bearings and outer cvs. £50 for the pair posted



Selection of crankshaft pulleys. One standard 1275 pulley (SOLD), one modified to take a 6pk belt for supercharger use with trigger wheel and a pulley with trigger wheel machined in (SOLD). £12 each posted



Complete brake servo unit with bracket, arms and new master cylinder. £55 posted SOLD



Standard coil £10 posted

Edited by adamt on 10th Dec, 2012.

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

Hi Adam, have you got any pictures of the intercooler in place from above? How does it fit in relation to the oil filter to block pipe, and the slam panel?

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Hi mate, can I take the fuel reg with the top screws on there and the pulley with the trigger wheel machined

pm'd

I'll have the standard pulley please. Can you let me know how to pay you?

Turbo fuel pressure regulator please can you pm me your paypal.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Everyone who asked for stuff should have pm's

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

Mike i can't find a picture of looking down at the intercooler. It fits inbetween the slam panel and the pipe from the block to the filter. I also had some chunky braided hoses at one point running to an oil cooler and they still fitted behind it, but it had to tilt back slightly.

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

Okay, cheers, and is it just the two mountings that bolt to the slam panel?

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Yep thats right

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

Awesome, I'll check the bank balance and get back to you

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Il take the left hand pully if it avalible?

Pm me if so

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!

Pressure reg for me plz mate, if still available.

Edited by Scudy23 on 20th Nov, 2012.

Could I have a crank pulley with trigger wheel?

Both regulators now SOLD
Standard pulley SOLD
Pulley with trigger wheel SOLD

Still have the pulley for supercharger use

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

BUMP Still parts for Sale

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

Have you posted the reg yet?

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Yep was posted yesterday Simon

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

Ok cool.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Bump.
Servo and master cylinder now sold.
Still parts left

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0