Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > MS Trials & Testing > Bench testing the siamese code *** Updated code

minimiglia0

17 Posts
Member #: 1555
Member

so can i use the mpi reluctor ring and sensor at all or do i have to produce a 36-1 otherwise.
also i wasn going to be using the mpi camshaft as i am fitting a piper phase 3 turbo camshaft so my cam pick up will be gone
many thanks mike


miniminor63

User Avatar

1849 Posts
Member #: 672
The oversills police

Oslo, Norway

general consensus seems to be that the phase 2 cam is better than phase 3 for all but all out racing with high revs.

Edited by miniminor63 on 6th Sep, 2007.


jbelanger

1244 Posts
Member #: 831
Post Whore

Montreal, Canada

On 6th of Sep, 2007 at 08:40am minimiglia0 said:
so can i use the mpi reluctor ring and sensor at all or do i have to produce a 36-1 otherwise.
also i wasn going to be using the mpi camshaft as i am fitting a piper phase 3 turbo camshaft so my cam pick up will be gone
many thanks mike

The code doesn't support the 36-4 and I don't know when it will. And you don't need the cam signal unless you want to go to full sequential injection and ignition which will be supported in the next version. Full sequential is not supported in the initial code version.

Jean

http://www.jbperf.com/


minimiglia0

17 Posts
Member #: 1555
Member

sorry jean i meant can i use the mpi reluctor ring and sensor with the three extra gaps replaced cheers


Bat

User Avatar

4559 Posts
Member #: 786
Post Whore

Bermingum

Hi,
I can see why not. I'm intending too so I hope so *surprised*
Cheers,
Gavin :)

VEMs Authorised Installer / Re-seller. K head kits now available!

WB/EGT gauges. Click here for customers write-up

Visit www.doyouneedabrain.co.uk

My Mini build diary


Sprocket

User Avatar

11043 Posts
Member #: 965
Post Whore

Preston On The Brook



On 6th of Sep, 2007 at 01:09pm minimiglia0 said:
sorry jean i meant can i use the mpi reluctor ring and sensor with the three extra gaps replaced cheers


http://www.turbominis.co.uk/forums/index.php?p=vt&tid=129155


No reason why you cant weld up the missing teeth, as long as you get them as close to similar of the rest

Edited by Sprocket on 6th Sep, 2007.

On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be...
So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'...


On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........


minimiglia0

17 Posts
Member #: 1555
Member

hi there everyone how is the testing going the thread seems to have gone cold again

Home > MS Trials & Testing > Bench testing the siamese code *** Updated code
Users viewing this thread: none. (+ 1 Guests) <- Prev  
To post messages you must be logged in!
Username: Password:
Page: