Rear toe/ camber bracket loose
Turbo Mini Forums

It seems as if my rear left toe/ camber bracket is slackening during driving. I can set it go out for a drive and it's lovely but after a short time (or some large bumps and hard cornering) and then the back end gets sloppy and starts to oversteer and become loose.

Anyone else had this/ got any suggestions?

Thanks
Dan

Edited by dan187 on 26th Apr, 2012.

1275 N/A Sprite, 998 T2 Turbo Mayfair
1275 EFi Turbo

Ive heard of people welding a couple of tacks to hold the lock nuts in place before.

What make of brackets are they?

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

MiniSpares

I was thinking it might be worth tacking the adjustment setting plate in place.

1275 N/A Sprite, 998 T2 Turbo Mayfair
1275 EFi Turbo

I welded my MiniSport assembly, I wasn't convined it would hold at all. The bracket itself can still come off so still able to remove the radius arm.