Lots of engine/turbo parts for Sale
Turbo Mini Forums

Morspeed 1293 linered block with crankshaft, bores have had some scuffing, crankshaft in good condition £60 collection only



Set of +20" cast pistons and conrods. Three of the pistons are broken but conrods are fine £15posted

]
Standard Rockers £20 posted


MED heavy duty pushrods, seen little use £50 posted


Timing cover with breather £15 posted


Rocker covers £15 each posted


Standard pushrods £10 posted


Standard duplex timing gears and chain £20 posted


Timing Plate £10 posted


Transfer cases and cover £30 each posted



Starter motor £10 posted


Pre verto flywheel with clutch plate and backplate. £60 collection only


All items are located near Barry, South Wales

Edited by adamt on 16th Aug, 2012.

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

If only you had posted this a month or two ago... I would have taken the lot...

But i'll just take the MG cam? I'll pm you.

Unless you fancy posting the T2 + mirage kit?

EDIT: possibly the starter motor as well? What type is it?

Edited by Mike-998 on 10th Jun, 2012.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Pm'ed with regards to the avonbar phase 2 camshaft

PM'd about the carb & MED 1.3 roller rockers

My build thread: http://www.turbominis.co.uk/forums/index.php?p=vt&tid=454802

Flickr: http://www.flickr.com/photos/85313398@N02/

Is the Avonbar Phase 2 the Phase 2 turbo cam? If so, I'll take it and the mini spares 1.5 rockers.

I will take the 1.3's, how much posted?

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Balls too late if it falls lmk

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Pmd

pmd about gearbox

BHP sells engines, but Torque wins races!

i will have the 1.5 rockers if the sale above falls through, cash waiting (or paypal)

Edited by Brett on 10th Jun, 2012.

Yes i moved to the darkside

Instagram @jdm_brett

carb/manifold/plenum if available? can work something out in regards to it getting picked up

“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

PM sent

69' Mini K Van
1986 Omni GLHS Shelby

PM'd about the cast Omega's

Pmd about gearbox, flywheel, duplex etc

P m sent

hello bud i wouldnt mind those-Mini Spares 1.5 roller rockers
shame you wont post the carb and plenum for is or would have had those 2 !

I'll take the starter motor please. :)

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Vernier timing set please! PM en route

www.topcatcustom.co.uk

Carb,plenum, inlet manifold, ph2 cam, mg cam and 1.3 rockers now sold

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

One gearbox now sold, one still available
Piper alloy duplex now sold

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0

Would you consider posting the blocks?

Someone has beat you to it sorry. Im waiting to hear back, if they don't then its yours

My project Toyota powered mini: http://www.turbominis.co.uk/forums/index.p...tid=470448&fr=0